WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   V215 interior removal (http://www.wakeworld.com/forum/showthread.php?t=801601)

Jmorlan 04-01-2014 11:46 PM

V215 interior removal
 
This weekend I'll be removing the sub box that came with my boat that is placed in the observer locker. And replacing it with a good size, built to spec box for a single 12, and locating another 12 beneath the helm.

But to do so, I need to remove the port side seating. Does the interior in this boat come out in 1 piece? Or are the port/rear/starboard seating 3 pieces?

yubasanger 04-02-2014 12:31 AM

Side panels have to be removed first then the back seat can be removed. Finally the seat base can be removed. The base is all 1 piece big horseshoe shaped fiberglass piece. Be prepared for this to take awhile reaching behind all the side panels to remove all the nuts and washers will take awhile 7/16 deep socket and a 7/16 ratcheting box wrench are your friend.


All times are GMT -7. The time now is 3:42 AM.