WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Extra set of wires in my FCT3 tower? (http://www.wakeworld.com/forum/showthread.php?t=801494)

ride152 03-24-2014 11:35 AM

Extra set of wires in my FCT3 tower?
 
I am upgrading to WetSounds audio from my stock and plan to get the LEDS as well. I'll need to wire in a power and a ground to the LEDs and was poking around my tower the other day and noticed two wires that have no destination. I noticed them in a hole in the tower near my Starboard tower speaker. Nothing else in is the hole except these two wires that are cut off.

I have a 2010 SANTE 210 with the FCT3 tower and 4 tower speakers.

My question is, what are these for and do you happen to know where their destination is? I can't seem to trace them back to anything.......
Hoping I can use these as the power and ground for the LEDs on the Rev10s.

Thanks in advance for your help!

phathom 03-24-2014 2:03 PM

If they aren't going to anything and everything functions in the boat like it should, I think you just found a spare set of speaker wires that got left in there. Either utilize these, or use them to help fish new wire.

TomH 03-24-2014 2:39 PM

My guess would be that it's pre-installed wire for a nav light.

spencerwm 03-24-2014 3:40 PM

Quote:

Originally Posted by TomH (Post 1869941)
My guess would be that it's pre-installed wire for a nav light.

Me too. I think that is the nav light wiring.

ride152 03-25-2014 2:18 PM

Thanks for your help guys! I called my dealership and they think it is the same thing........

I'll do some hunting tonight and see if I can find out where it ends up.


All times are GMT -7. The time now is 7:26 PM.