WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Reinforcing V-drive dividers (http://www.wakeworld.com/forum/showthread.php?t=800235)

tn_rider 10-15-2013 11:18 AM

Reinforcing V-drive dividers
I upgraded to 1100's in each rear compartment and I'm wondering how some of you guys who reinforced your dividers. Pics would be amazing!! Thanks!

WABoating 10-15-2013 12:05 PM

Aluminum channel...
I used aluminum channel, on the engine side of the dividers. Aluminum doesn't rust and keeping it on the engine side prevents the channel from damaging the fat sacs. I ran them vertically, two per divider, spaced at 1/3rds and 2/3rds across the width.

h20king 10-19-2013 9:58 AM

2 Attachment(s)
I did the same here are a couple pics

scottb7 10-19-2013 10:21 AM

3 Attachment(s)
This is what i did in 2008 210

ilikebeaverandboats 10-19-2013 10:45 AM

I need to do this haha

All times are GMT -7. The time now is 1:02 AM.