WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Rubber inserts for tower mirror clamp (http://www.wakeworld.com/forum/showthread.php?t=798828)

MVFDFiremedic 06-27-2013 3:17 PM

Rubber inserts for tower mirror clamp
 
Looking for where to buy some new rubber inserts for my tower mirror clamp. Running a 1 7/8 clamp on a 1 5/8 tower. It works but the old one is all busted and I need a new one. Any one know were to purchase a 2/8 inch rubber insert with the flange ... I could use old hose..etc.. but I want the rubber. Thanks.

Alleykat 06-27-2013 9:51 PM

2/8" ? Same as a 1/4" bud. Just go get a roll of radiator hose tape. It's rubber and sticks only to itself. You can wrap it neatly to the thickness you need and call it good. Might cost ya 5 bucks or 500 penies.

Camsquared211 06-28-2013 12:11 AM

Quote:

Originally Posted by Alleykat (Post 1830492)
2/8" ? Same as a 1/4" bud. Just go get a roll of radiator hose tape. It's rubber and sticks only to itself. You can wrap it neatly to the thickness you need and call it good. Might cost ya 5 bucks or 500 penies.

HAHA 500 Pennies. or maybe 50/10 dollars...

MVFDFiremedic 06-28-2013 1:27 AM

or 2 bits.... thanks... 1/4.. can't believe I didnt see that.. ...

dhcomp1 06-28-2013 8:48 AM

You can really use anything you want to take up this space.

I'd use some rubber radiator hose before the tape, but to each his own.

Weatherstripping (think home depot, bottom of garage door, or door sweep) works great too. Its dense, flexible, and not slippery.

SkySki 06-28-2013 10:43 AM

I have some from a set of airboom racks and skylon speakers. I have a box of those inserts. Shoot me a PM. I am not home, so I can't check on the exact sizes I have. Pay shipping and you can have the set you need - if I have them.


All times are GMT -7. The time now is 1:18 PM.