WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Sport Nautique Integrated Ballast -Pics Please (http://www.wakeworld.com/forum/showthread.php?t=797917)

kmac1587 05-02-2013 9:29 PM

Sport Nautique Integrated Ballast -Pics Please
 
I'm looking for some pictures/ideas on what some people have done to integrate ballast/ballast pumps into their SN Direct Drives. We are using primarily 2 Bags on the sides of the engine (possibly replacing the led in bow with a other bag) and i'm looking for some ideas on how to clean up the setup. If people have worked out a way to run hoses so they aren't hauling out pumps and hoses every-time they want to fill up thats what I am mainly looking for.

DenverRider 05-03-2013 10:03 AM

I looked into this pretty heavily at one point. I had bookmarks on websites that sold Jabsco pumps and various thru hull fittings and hoses. I thoroughly read a post on wake world where someone had detailed their automated ballast filler project. I was going to build seats that ran from the front to the back on each side of the engine compartment that would house the bags even though you would have to walk on them to get from the front to the back of the boat (easier to walk on than sacs). I purchased a couple sheets of Marine plywood and took measurements. I had talked to my upholstery guy about the cost of covering my custom work with padding and vinyl to make it look pretty. It was a complex plan that I scrapped in favor of shelling out some extra cash to go from a direct drive to a v-drive with built in factory ballast. Sometimes you have to know when to go from taking a half step forward to a full step.


All times are GMT -7. The time now is 4:21 AM.