WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Need pics bow filler cushion for V215 (http://www.wakeworld.com/forum/showthread.php?t=797823)

RonBurgundy 04-26-2013 9:25 AM

Need pics bow filler cushion for V215
 
I had a bow filler cushion made for my Sanger v215 and I fear it may be missing something. It fits tightly between my existing bow seats, but sits on such a small lip of fiberglass that if you sit on the cushion it can push to either side by about 1/2 inch and it falls in..hopefully this makes sense.

Looking for pictures of the bottom of your filler cushion if you have one so I can make sure Im not missing anything.

Thanks!!!

bryce2320 04-26-2013 12:23 PM

Quote:

Originally Posted by RonBurgundy (Post 1818912)
I had a bow filler cushion made for my Sanger v215 and I fear it may be missing something. It fits tightly between my existing bow seats, but sits on such a small lip of fiberglass that if you sit on the cushion it can push to either side by about 1/2 inch and it falls in..hopefully this makes sense.

Looking for pictures of the bottom of your filler cushion if you have one so I can make sure Im not missing anything.

Thanks!!!

If its moving around a 1/2", I wouldnt consider that being a tight fit. I made the board for my bow filler cushion, and had the upholstery guys upholster it. It only has 1/2" lip of fiberglass on each side, if that and it has never slipped off and fell in. Maybe post up a picture of what you have right now and see what others think you could do differently.

RonBurgundy 04-26-2013 5:40 PM

Obviously it can move......it's plastic on waxed fiberglass; a damn slippery combo. The side cushions holding it in place are obviously made of foam so they have some give.

Anyone have pics of the underside for any of their cushions?


All times are GMT -7. The time now is 1:04 AM.