WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Ronix adaptors (6" bindings on 8" board) (http://www.wakeworld.com/forum/showthread.php?t=797375)

Kane 03-21-2013 5:47 PM

Ronix adaptors (6" bindings on 8" board)
Can anyone tell me where I can find these puppies for sale online, or would anyone form wakeworld like to sell me some that they no longer use?
Maybe I'm using the wrong term but I can't find them online.

broski 03-21-2013 8:23 PM

they are a little pricey for what they are imo, but this is the same price a local shop had them for as well. hope this helps!!!


broski 03-21-2013 8:28 PM

btw depending on the size and number of holes as well, sometimes you can get away with one on each binding. for example if you are going all the way out, you would put the hole farthest out on the inside of you foot where thew bolts would normally go, and then use the spacer to get the bolt in the next to last hole on the outside of the foot. of course this is going to cut your max width stance down half an inch on each side, but is a good way to save 20$. just make sue to size them up before you order.

All times are GMT -7. The time now is 4:27 AM.