WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Video and Photography (http://www.wakeworld.com/forum/forumdisplay.php?f=87667)
-   -   DIY GoPro Monopod (http://www.wakeworld.com/forum/showthread.php?t=797265)

MCObray 03-13-2013 9:57 PM

DIY GoPro Monopod
I didn't see one of these posted, but here is one my cheap, easy solutions that I use for my GoPro.
Materials: I sourced my materials from Home Depot/Lowes.
1/2" x 36 PVC Pipe (threaded both ends).
1/2" Cap (also threaded).
1/4" 20 Bolt & Hex Nut (1/4"-20x5/8" to be exact).
3/6" Eye Bolt & Hex Nut (3/16" x 1 1/2" to be exact). This is for a optional strap mount.
2 Split Locks.
GoPro TriPod Mount.
Drill & Drill Bit (1/4" Drill Bit & 3/6" Drill Bit).
Screw Driver & Wrench.

Cost: $10-$15. Addition $ for a handle bar grip, that can be found at a local bike shop.

24 inch:
36 inch:
These monopods are very VERY sturdy. I have take full-torqued baseball swings with nothing coming loose or flying away!

JJ 03-15-2013 10:02 AM

1 Attachment(s)
Swiffer poles work awesome too!

MCObray 03-15-2013 10:39 AM


Originally Posted by JJ (Post 1811623)
Swiffer poles work awesome too!

Ha, whatever gets the short. That's all that matters!

All times are GMT -7. The time now is 2:28 AM.