WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Wetsounds XS 650 in an X1/205v/ XStar (http://www.wakeworld.com/forum/showthread.php?t=796783)

xstarrider 01-29-2013 12:38 PM

Wetsounds XS 650 in an X1/205v/ XStar
Anyone done it? I am concerned the length of the speaker will give me some problems in the bow area. According to my prelim measurements its right at the maximum allowance. I don't want to have to use spacers or LED rings.

I am also tossing around the JL 6.5's

wetsounds1 01-29-2013 2:11 PM

You can also pull the rubber magnet cover boot off and gain a little bit more room. Pretty sure it would fit then.

Wet Sounds

chattwake 01-30-2013 7:40 AM

I installed some xs650's in a 1999 205V last year. We installed some led light rings behind the speakers. There were no clearance issues. I believe that the speakers would have fit fine without the led rings.

jhuff79 01-31-2013 10:43 PM

I have them in a 2006 X1 in the stock locations. It worked out great. They are awesome speakers.

All times are GMT -7. The time now is 12:44 PM.