WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Will other Tower Clamps fit a Roswell bar?? (http://www.wakeworld.com/forum/showthread.php?t=796155)

andrewjet 11-09-2012 2:31 PM

Will other Tower Clamps fit a Roswell bar??
 
Need help! I have a 1.75 tower Dia and Roswell only makes a 1.90 Dia. Thats too big for my tower. I need some tips or advice on other clamps fitting?

jagermeister 12-02-2012 7:33 PM

I might have clamps to fit the roswell 1.75.. What are you mounting?.. There are several types of clamps available..

bryce2320 12-02-2012 7:55 PM

Do they not have rubber inserts that you can put between the clamps and bar?

chpthril 12-02-2012 8:11 PM

Roswell's website shows to have inserts down to 1.6 upon request. I would call them.

jagermeister 12-03-2012 8:34 PM

I have both.. The non rubber insert type are stronger but will scuff the aluminum..

chpthril 12-03-2012 8:46 PM

Quote:

Originally Posted by jagermeister (Post 1796927)
I have both.. The non rubber insert type are stronger but will scuff the aluminum..

A strip of this around the tower thats cut to the width of the clamp will prevent that.

http://www.invisiblemask.com/?gclid=...FYqZ4AodyhQApQ

wakereviews 12-04-2012 6:42 AM

Roswell does carry universal inserts for other clamp sizes FYI.

andrewjet 12-15-2012 8:36 AM

1 Attachment(s)
I am mounting a roswell bar. Hey Jager! Shoot me a pic. 214-562-6911

andrewjet 12-30-2012 9:05 AM

Jager,,CALL ME!!


All times are GMT -7. The time now is 5:25 PM.