WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   diy wake bimini clamps (http://www.wakeworld.com/forum/showthread.php?t=795790)

bwake 10-03-2012 4:25 PM

diy wake bimini clamps
Hi all,

Have my ballast parts all ordered (cheers wakemakers) and now wouldnt mind getting my bimini top modified to fit on the tower.

I purchased the boat (Sanger v210) without a tower, put one on and now the bimini wont fit. Its a standard looking overtons bimini. Im going to cut it down however arent too sure what fittings im going to need to attach to the clamps so it can sit on the tower.

Is anyone able to point me in the right direction on what works. DIY wake sent me a pic of one of their competitors products and didnt have any of the mounting.


market_open 10-03-2012 7:15 PM

Check out Tower Biminis dot com, they sell their front clamp (FC-004) I used those, and clamps very similar to the ones from DIY wake for the back of the tower. It worked out very well for me when converting a bimini that came with the boat to fit on my tower.

bwake 10-03-2012 7:43 PM

Thanks Mark,

None of the pictures they have show the fittings close enough so if you have some id be keen to have a look. Have emailed them about shipping but havent heard as yet, so not sure whether they are interested hence looking at diy.


All times are GMT -7. The time now is 12:23 PM.