WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Anyone know of any good stargazer upgrade deals? (http://www.wakeworld.com/forum/showthread.php?t=795405)

airbeast 09-06-2012 12:56 AM

Anyone know of any good stargazer upgrade deals?
I'm looking for a mechanical stargazer upgrade and multiline gauge.

I've had about enough of the paddlewheel perfect pass. My girlfriend and several people ride at slower speeds. Right at the point where the boat wants to fall off plane. There is some change in waterflow over the hull and the paddlewheel speed becomes eroneous and messes up the perfect pass. I basically have to drive them by hand. It has trouble holding well for me at times as well. Slows down and speeds up too much during turns in double ups.

Does anyone know of a better deal than straight through perfect pass?


boardjnky4 09-06-2012 7:06 AM


There was a thread on here a little while back, and the consensus seemed to be that this works equally as well as the stargazer add-on for half the price.

airbeast 09-07-2012 2:07 PM

Thanks for telling me about that. Ordered from them. $250 is much better than $700

seth 09-07-2012 2:17 PM

Yep, it works awesome. Ive been running the Nautic Logic all summer.

boardjnky4 09-07-2012 2:21 PM

Glad to help

airbeast 09-14-2012 6:29 PM

Best $250 spent. Solved all my issues. I highly recommend! Only thing is it needs a really clean power supply. I had an electromagnetic fuel pump on the same circuit and it jitters the voltage enough to where that nautic laugic box drops out. A clean supply voltage solved that problem.

olmoomba 09-18-2012 4:37 PM

2 years with nautic logic. holds dead on, my paddlewheel still works my speedo on my dash, so I can compensate when on a river. my only complaint is the connection gets loose on my set up at the input to the module. I probably just need to add some conductive grease to help with the contacts.

All times are GMT -7. The time now is 8:37 PM.