WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakesurfing (http://www.wakeworld.com/forum/forumdisplay.php?f=87668)
-   -   Shirtboard (http://www.wakeworld.com/forum/showthread.php?t=795311)

bigshow 08-30-2012 9:11 PM

Shirtboard
 
1 Attachment(s)
Our new house has a built in ironing board. So what should I do with my old ironing board?

BlairJ 08-31-2012 2:07 PM

Stuff it with styrofoam. Use excessive amounts of duct tape. Surf.

bigshow 08-31-2012 3:24 PM

Creamy Filling
 
2 Attachment(s)
I mixed a little water with Gorilla glue laid it out, spritzed it with more water and let it foam up.

rallyart 09-01-2012 12:07 AM

Hang on there. That's a photoshopped garage. There are empty shelves, several places where you can see the floor, and even organized tools. How do we know that is a real ironing board?
Oh, and do you ride top up with square edges down or top down and the rounded edge into the wave?

newwhit 09-01-2012 8:28 AM

this is getting good...

durty_curt 09-01-2012 9:26 AM

House came with a ironing board eh? Ill state the obvious... Give the old one away or throw it away. Save yourself some shaping time

bigshow 09-01-2012 11:36 AM

1 Attachment(s)
I have a washer and dryer, French Country hutch, and a gas grill to get rid of and maybe some other furniture to get rid of as well.

Draped with a fabric covering, ready for some resin.

rallyart 09-01-2012 4:52 PM

I don't see the gas grill as that good for a surf board so the shirt board was the best idea.

silver98formula 09-01-2012 7:17 PM

Can't wait to see the finished version.

bigshow 09-01-2012 9:18 PM

2 Attachment(s)
A little more progress... The fabric top and epoxy have been attached. The fabric was supposed to look like typical ironing board covering but the resin made it look more translucent and I couldn’t get the air bubbles out. I've glassed the bottom of the board.

bigshow 09-02-2012 9:42 AM

4 Attachment(s)
I thought that I'd do a fabric inlay on the top side of the board. What do you think?

timmyb 09-02-2012 10:55 PM

HAHAHA! That's awesome! Even more awesome is the Ohio State bucket in the background.:cool:

bigshow 09-03-2012 6:54 AM

Well, I do live in Columbus and I’m paying tuition for my daughter at the institution. You’d think that they’d throw in the bucket for free after paying tuition but I had to go to Lowes and spend more $ to get the bucket.

09-03-2012 9:35 AM

At least she's going to the right school :)

idaho_hillbilly 09-03-2012 10:10 AM

Too bad you didn't have some corduroy pants to put on the front. I don't know....maybe you have too much free time. :)

Can't wait to see it in action!

bigshow 09-03-2012 10:44 AM

3 Attachment(s)
Someone suggested that I use kitchen utensils for the fins, but my wife saw and hid them:) ?There's the fin box install.

newwhit 09-07-2012 7:12 AM

keep it comin!!!

newwhit 09-13-2012 7:25 AM

ahhh man!

Houstonshark 09-13-2012 10:21 AM

Quote:

Originally Posted by idaho_hillbilly (Post 1780336)
Too bad you didn't have some corduroy pants to put on the front. I don't know....maybe you have too much free time. :)

Can't wait to see it in action!

That would have been awesome! The pants or maybe even some jorts at the wide part with this shirt at the top:

http://img.tapatalk.com/d/12/09/14/my6enyra.jpg

rallyart 09-29-2012 10:10 PM

Show, I hope you haven't decided to go with the dry cleaner instead.

bigshow 09-30-2012 2:23 PM

The board is essetailly done. I need to put traction on. the problem is that the season here in Ohio is about over, might not get to try it this year.

cowwboy 10-01-2012 6:27 AM

I can't wait to see the results!!

bigcatpt 10-25-2012 5:09 PM

Dang Show you big tease! Leaving us hanging like that all winter!!! :banghead:

cragrat 11-23-2012 8:31 PM

5 Attachment(s)
I was inspired. Glass work on Surf Wyoming Prototype begins tomorrow...

bigshow 11-24-2012 7:18 AM

Love the fin!

wofrankwo 11-24-2012 4:10 PM

an Entire New Class has been Created!! you Guys Rock!!

cragrat 11-26-2012 8:06 AM

3 Attachment(s)
Spent most of the weekend getting ready for vacation, so I didn't get to the glass work. Fins painted and epoxied in place... and fabric chosen. Can't wait to have this thing up in the rack on the lake...

cowwboy 12-09-2012 7:36 PM

That's awesome!!

cragrat 12-10-2012 10:19 PM

1 Attachment(s)
Attachment 26849

cragrat 01-26-2013 8:58 PM

1 Attachment(s)
Bottom done. Top tomorrow. Resin offically SUCKS...

Alleykat 01-27-2013 10:07 AM

Especially when its that cold outside.


All times are GMT -7. The time now is 1:18 PM.