WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Advice on Rail build (http://www.wakeworld.com/forum/showthread.php?t=794416)

ilboarder12 07-11-2012 5:15 AM

Advice on Rail build
 
planning to pound in 4x4 posts into a mud bottom pond for the first rail in a winch park. from past experience i find that as you pound on the top of the post it starts to splinter making for a pain when it comes to assembling the sliding structure. i found this post driving cap http://dockmaker.com/Merchant2/merch...Category_Code= but didn't really want to drop the $40 and have to wait for it to be shipped here. any suggestions or advice with this project?

shredthagnar 07-11-2012 6:08 AM

http://www.youtube.com/watch?v=5kQQr...e_gdata_player

I copied this in a couple hours

wakeboardern1 07-11-2012 6:57 AM

drive em down and cut the tops off. It's what we've done for all the rails we've built here at my lake.

adeguzman 07-11-2012 11:23 AM

Wrap the top where you're hitting the post with duct tape. This will help it from splitting then cut them down to the height you want.


All times are GMT -7. The time now is 2:11 PM.