My Plasti Dipped Ronix Bill
I scooped up a demo Ronix Bill from Daniel at M2 last week to ride at Wake Nation. The board looked pretty new, like it was ridden just a few times...HARD! It had a scratches and nicks and one good sized gouge that went down onto the edge of the board. Everything was cosmetic but I decided to fix the gouge and clean up the board and make it a little different.
I forgot to take pics of the gouge before I repaired it. Here's a couple pics of the repair and the board prior to Plasti Dip. http://i295.photobucket.com/albums/m...8/883096ed.jpg http://i295.photobucket.com/albums/m...8/b89ed730.jpg I got a bad can of Plasti Dip that I just could not get to spray evenly. I sanded it a little and prepped it for another coat or two. We are headed to the wake park today last minute so I decided to throw some boots on it and take it as is. I have a pair of Ronix Relik's that I think will look pretty sweet on it but all I had with me today are these Kai open toe. We'll see how it holds up. The stuff is pretty durable but I don't have real high expectations and don't really care as it will get beat up anyway. http://i295.photobucket.com/albums/m...8/270851c2.jpg http://i295.photobucket.com/albums/m...8/ce0f0002.jpg http://i295.photobucket.com/albums/m...8/639bc865.jpg |
I'm interested to see how it holds up after a few runs through the park.
|
It will definitely be challenged today. I'm a pretty novice rider (been riding for less than a year) and only been to the cable park a couple times. I hit my first slider box the last time I went and finally landed it after having wrecked virtually every way possible.
If anyone can screw this board up, it's me right now. |
very interested to see how it holds up. i have an 08 murray still, can't afford a new one right now, so that would be an awesome option to clean it up and maybe change the color or something so it'd be "new to me!" in appearance anyway!
where do you get plasti dip? is it like a spray paint can or what? |
+1 please post some pics later I would like to do this to one of my old boards.
|
Sippi: http://www.plastidip.com/ Most people buy the spray can version.
|
Cool, I am going to plasti-dip my chrome bumpers and ugly stock wheels on my tundra!
|
Try some bed liner
|
Quote:
So far so good today. I've wrecked 3-4 times and the board pretty much looks the same. |
if you can just peel it off you would think that it would peel off after riding. i mean the plasti dip has to stop at the edges right, seems like it would just peel right there. but i don't know i might have to try it anyway. did you sand your board first or can you just put it straight on there. My murray has the texture of being sanded anyway so it probably won't matter much on my board.
|
Just saw on the website they have a plasti dip "smoke" that's translucent. that would be cool for some boards, not really mine considering its just gray to begin with.
|
Quote:
I taped up to the lower part of all the edges and then sprayed it. I'll take some pics of the board later tonight. I essentially ended all 10-12 of my runs today with a crash on a box or rail. The board looks fine. I actually bought some flat clear and planned on clearing the whole thing once I was done. I expected this to somewhat seal the edges. I still may once I lay down another cost of Plasti Dip. The nice thing about this stuff is that it bonds and blends to itself pretty well. If you have a problem with an edge you can just respray it. Yes I sanded the board before spraying it. I just used a scotch brite pad. Make sure you clean it well before spraying. |
|
Quote:
|
Thinking of plasti dipping the boat.
What you think? |
Like just the graphic area or like 100% covered? I foresee friction issues with plastidip on the bottom of the hull.
|
|
1 Attachment(s)
I did my truck bumper and grill last week as well :) super easy to do.
|
Did it add much weight to the board?
|
hmmm....plastidip my Shredstixx Elevation!? that thing is like eggshells is the AZ heat.....might hit it with some translucent dip?
|
Joe U - I like the way it turned out. I can't believe that is plasti dip actually. I may have to think about doing a few things with this stuff, it really looks nice. Easy to do I am assuming.
Joe with Truck - I am thinking about doing my truck grill did you take it off the truck to do that? |
1 Attachment(s)
Nope just taped off the headlights, put some newspaper behind the grill to protect spraying the radiator...opened the hood. Even if you get some overspray on the paint or whaterver, just wait till it drys and rub it back and forth with your finger (kind of like, umm nevermind) until it comes off. Blacked out my emblems on the tailgate just for fun. Just wait till it drys and its super easy to peel back. Youtube has a lot of how to do it.
|
I think im gonna dip the boat. Just not the bottom. You think i could do the sides?
|
Don't see why not... "poor man's wrap". I wouldn't but id like to see someone else do it haha
|
Ill post picks if I do it for sure. Wanna donate the funds since im the rat?
|
Scott R, the crappy thing about audi grills is that you have to take off the bumper cover to take off the grill. there are tutorials out there but i just didn't want to deal w/ it, so i got a local kid (audi enthusiast) to do it for me. but the painting process is super easy. just wash & dry thoroughly and apply 3-4 coats. the wheels i did myself. i did 1 wheel at a time. again, wash & dry thoroughly and apply 3-4 coats. don't hold the spray can too far from the surface or you'll get a bit of texture. keep it about 6 inches and you'll be fine. i think if i had a sprayer, i would've done my whole car already. haha!
|
Yes, do the boat! That would be sweet! Its only $5.98 a can and if you only do the sides, you could do your boat for like $20 or less depending on how much you use. Save $2980 on a wrap!
|
Umali, Why did you even take off the grill? Any overspray just rubs right off...
|
taping off the radiator is almost impossible w/o having to take off the bumper cover, so might as well take the grill off.
|
Oh gotcha! Makes sense.
|
I have been a fan of plastidip for a while.
I've been thinking of doing the brushed grates on my Axis, but I'm worried how hard it would be to remove it from the mesh if I don't like it. https://lh4.googleusercontent.com/-3...0/DSCN5105.JPG |
Those are some sick examples. After a little searching I found this site that has a ton of examples for cars, so boats definitely sound like the next step...
http://www.dipyourcar.com/shop/page/38?shop_param= |
With all these ideas I want to dip my beach cruiser now.
|
After watching some of the videos I am thinking about doing my car wheels and emblems. It is pretty neat for sure.
|
Just dipped my board. Went to www.plastidipped.com to order it.
Need 1 more can to cover up the black a little better. http://i76.photobucket.com/albums/j3...5-31221921.jpg |
I did some chrome 22"s and than black out the spokes. Worked like a champ. Sold the rims and peeled it right off.
Put 10 coats on my truck grille last year and it still looks great. Better than the powder coated I pay for. |
I wanted to bring this thread back to life real quick to show my grill, bumpers, and emblems plasti dipped. Man I love this stuff!!
http://img.tapatalk.com/ad4865c4-5dc0-0db0.jpghttp://img.tapatalk.com/ad4865c4-5dcc-685f.jpghttp://img.tapatalk.com/ad4865c4-5dfe-0cd0.jpg Next up is the black headlight mod which I am leery of trying. I may even plasti dip my trailer rims and my stock truck rims. |
2 Attachment(s)
Thought I might revive this one. I picked up a pair of last season's system bindings to put on my Phoenix Prject last week. As I was putting them on, my buddy called and told me he had put the exact same setup together. Having been sucked into the world of Plastidip lately, I gave it a shot on my Systems! First pic is after, second is before.
|
Im thinking about plasti dipping my board, I don't know really how to do it. Do you plasti dip the bottom of the board too or just the top and how many layers do you put on? Thank you for the help!
|
Quote:
|
Houstonshark are you coming up to spring round up this year?
|
Hi, I'm thinking of plasti dipping my board to give it some new life and I want to do a blue/orange design with Plasti dip's Blaze colors. Would I be okay simply spraying the top blue with 3 coats, taping off the designs I want left blue, and then doing 3 coats of orange to finish
or will I need to do a white base coat first? I'm actually really excited about this hahaha |
No need for white base coat. Just spray each coat really light and spray 4 or 5 coats minimum.
|
I just did my old cable board with the blaze colors Orange and blue! Honestly I would have done another coat of orange but I didn't want to go through the trouble of buying/waiting for shipping on another can.
Threw a quick video of it together. <iframe width="560" height="315" src="http://www.youtube.com/embed/jeRc6ySEQBg" frameborder="0" allowfullscreen></iframe> |
3 Attachment(s)
Just got my 6 y/o son an old Super Squirt, it was pretty faded so decided to try this out.
|
Lekker!
|
Heres my before and after dip on my grille and window trim.
http://i29.photobucket.com/albums/c2...cf18a73a67.jpg http://i29.photobucket.com/albums/c2...47846799_n.jpg |
1 Attachment(s)
Went ahead and dipped my old slingshot recoil. Sf giants themed....decided to try and see if the bottom will hold up seeing as how I probably won't be hitting the cable park much anymore these days.
|
Those are water drops on it btw not plastidip
|
All times are GMT -7. The time now is 2:03 AM. |