WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Slingshot board and Ronix bindings? (http://www.wakeworld.com/forum/showthread.php?t=791479)

miljack 01-16-2012 6:56 PM

Slingshot board and Ronix bindings?
Will the new SS boards work with the 09 and up Ronix bindings? Seems like it would be ok if you could figure out how to get the Ronix serrated washer under the SS binding posts.

apf 01-16-2012 7:20 PM

yup...the serated piece seperates from the ronix thumb screw thing and slides over the SS studs..
I have had reflectos, reliks and parks on my recoil

flydenrict 01-17-2012 9:36 AM

Agreed. I have '10 Kais on my '12 Recoil.

wakecumberland 01-18-2012 7:01 AM

I have '10 Ones on my '09 Response. I add an extra washer to the screws to allow me to tighten the screw all the way. Otherwise, the screw bottoms out before the boot is tight to the board.

All times are GMT -7. The time now is 1:30 PM.