WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through August 27, 2003 (http://www.wakeworld.com/forum/forumdisplay.php?f=81017)
-   -   Completed Sub box for SAN (http://www.wakeworld.com/forum/showthread.php?t=78534)

wakejunky 08-15-2003 6:57 AM

Just finished up my latest project on the boat. I made a sub box for the area between the driver's seat and the rear seat of my 03' SAN. Doubled my cup holder capacity and I now have wrap around seating like the older SA's. Took a bit of work but, managed to get 1.5 cu. feet total for .75 on two sealed sub drivers. Running the Dayton Quatro drivers which have a recommended .35 cu. ft. sealed box. Carpeted the thing and then ordered a seat cushion from CC. <BR> <BR>Check out the pics. <BR> <BR>Chris <BR>No Slip Gator Grip <BR><a href="http://www.wakejunky.com" target="_blank">www.wakejunky.com</a> <BR> <BR> <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78535.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78536.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78537.jpg" alt=""> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/78538.jpg" alt="">

clint_h 08-15-2003 8:00 AM

Sweet Job!

dcervenka 08-15-2003 9:31 AM

nice work and very clean looking! I'm sure the person in that seat will be in for one hell of ride... <img src="http://www.wakeworld.com/MB/Discus/clipart/lol.gif" border=0>

colorider 08-15-2003 11:13 AM

Give the person in that seat some rumble in the bumble

typhoon 08-15-2003 11:15 AM

did you port the cup holders?<img src="http://www.wakeworld.com/MB/Discus/clipart/proud.gif" border=0> <BR> <BR>great work...

whitechocolate 08-15-2003 12:05 PM

That Look's real good. What do you think it cost you to do the whole thing excluding the drivers, <BR>What carpet did you use it looks like it matches perfect. It also looks like you used fiber glass resin to cover the MDF?

tlb 08-15-2003 12:17 PM

Mine's at West Coast now. You can start it next<img src="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" border=0>, Nice job.

wakejunky 08-15-2003 12:37 PM

Hey Guys, <BR> <BR>Grant: I used a single sheet of 3/4" MDF, about 16oz of Resin, 4 cup holders and scrap carpet from the shop, cushion from CC. Mind you I work for CC so, I got the cushion at cost so, I'm into it for about $170. <BR> <BR>Cup holders are completely separate from the sub boxes. I put a separate chamber just for the cup holders so, they are not part of the 1.5 cu. foot sub chamber. <BR> <BR>Chris <BR>No Slip Gator Grip <BR><a href="http://www.wakejunky.com" target="_blank">www.wakejunky.com</a>

joeblocephus 08-16-2003 6:27 AM

Chris, <BR> <BR>Nice installation, looks great. Your occupation says engineer and you said you work for CC. Are you an} engineer for CC?

bruce 08-16-2003 2:35 PM

Chris, How does your SAN pull with the Lance? Which model of camper is that, a 920? We're still in a short bed 825 and like it although it is small with four.

wakejunky 08-17-2003 2:32 AM

Long story short but, I'm actually an out of work Test Engineer who is working at West Coast Correct Craft. <BR>I have a Lance 2000 Lance 1120 a bit big for the SRW setup but, I've made enough mods to the truck's suspension and drivetrain to not worry about it too much. <BR> <BR>Chris <BR>No Slip Gator Grip <BR><a href="http://www.wakejunky.com" target="_blank">www.wakejunky.com</a>

endo 08-18-2003 5:46 PM

Great work, but how does it sound? What are you pushing them with?

mastercraft7100 08-18-2003 5:52 PM

Do you have new picture of your boat?


All times are GMT -7. The time now is 7:58 PM.