Has anyone added additional ballast lines on a pre-existing moomba system?
I want to install a line to the bow of my boat. I have the Gravity III setup and It looks like If I can get another sprinkler valve to add to the pre-existing 3 I could just run another line of the same pump and just run the valve switch to the dash? Has anyone done this and could give me some advice? lol
If your wanting to add another line for and integrated bow sac then here's how I did it.
Way easier then another solenoid and hose. With pump sac and fittings I was just under $220.
Same boat, so the write-up should be very helpful.
|All times are GMT -7. The time now is 11:08 PM.|