WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   06 X2 - Depth Gauge displaying "Bad" (http://www.wakeworld.com/forum/showthread.php?t=780640)

dmontandon 06-15-2010 5:35 PM

06 X2 - Depth Gauge displaying "Bad"
 
Help, the depth gauge says "BAD" however the rest of the multi gauge functions are working properly (air temp, water temp, etc). How can I fix this? I cant see to find any fuse to check between the module and the power... Any ideas guys? :confused:

hatepain 06-15-2010 7:26 PM

Thats not good!

chestech 06-15-2010 8:16 PM

Wish I had more for you... mine did the same thing the first day out of storage. After a few hours in the water it started working again.

dmontandon 06-18-2010 2:22 PM

Okay I know folks on here before have had this same prob, help a bro out....

talltigeguy 06-18-2010 6:47 PM

I have the same problem on my 2006 X45. The guys at Team talk were of no help either. If the guys on the MC website can't give any help, then I think we are hosed with either taking it to the dealer or replacing something myself.

I called the dealership and was told that there were so many things it could be, that they would have to have the boat to troubleshoot it. I was thinking of just replacing the transducer, because that is the most likely problem, but what if something else is the problem? Since the display works, I am hard pressed to beleive it would not work to just replace the transducer.

BTW, my water temp guage has never been accurate...it reads just a little less than air temp...always.


All times are GMT -7. The time now is 7:53 AM.