WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   board and binding fitment question (http://www.wakeworld.com/forum/showthread.php?t=780050)

vtrider01 05-30-2010 8:57 AM

board and binding fitment question
 
so this is probably a dumb question, but is it possible to mix and match companies? i got a chance to demo the ronix ibex and mana this past weekend and am pretty set on buying one of the two, but am looking at a pair of liquid force watsons as they just fit better than the ronix cell that was on the boards. it is possible to put lf bindings on a ronix board right?

patrickgoettig 05-30-2010 9:00 AM

Yep! If your looking at a 2010 board, the spacing on the mount holes is 6 inches. This means if you want to be able to adjust your binding width you need to buy bindings from 09 or newer. If your getting 2010 bindings and a 2010 board then your golden!

greenbass86 05-30-2010 10:37 AM

I can say that I have a friend who has CWB Bindings with a Liquid Force Board and has never had a problem


All times are GMT -7. The time now is 11:48 PM.