WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   How to repair my Slingshot Response? (http://www.wakeworld.com/forum/showthread.php?t=779678)

thescott 05-19-2010 10:31 AM

How to repair my Slingshot Response?
 
2 Attachment(s)
I just picked up a new 08 Response on good ol ebay. The seller packaged poorly and UPS put a nice ding in the sidewall.
How can I fix? Epoxy?

Damage isn't too bad...pics:
I don't know how far these sidewalls go into the board...do I even need to bother?

seth 05-19-2010 10:46 AM

was there shipping insurance on it? I would probably try to send it back or get some money back from the seller. If not I would put some expoy or glue on it and put a clamp on it to try to get that edge straightened out.

thescott 05-19-2010 10:59 AM

No shipping insurance. I took a chance buying from the guy since he had no ebay feedback...but it was only $125 and through paypal so I figured not much to worry about. Not really interested in trying to get $$ back or deal with the BS of a UPS claim. Otherwise the board is untouched and brand spankin new. If it's easy enough to repair on my own, I'll go with that.

wakeboard_pittsburgh 05-19-2010 11:27 AM

You can use surf expoxy if you want, but lately I have been using underwater pool cement. It is easy to use and it creates a great seal (its used to fill the cracks in pools).

I used some on my Recoil and it is still holding strong.

seth 05-19-2010 11:29 AM

yeah then you should be fine if you get it straightened up and sealed. If you left it like that I could see it creating a little drag on that edge.

flexnwake 05-19-2010 3:57 PM

JB weld works great too! Works great on base dings on the snowboard too. Just sand it down and make it butter...

The sidewall goes in about a half an inch.


All times are GMT -7. The time now is 7:05 PM.