WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Slider help... (http://www.wakeworld.com/forum/showthread.php?t=779613)

tbb1798 05-17-2010 7:40 PM

Slider help...
What do you use for the top of a funbox.....

hyperlite 05-18-2010 5:16 AM

trex......or pvc sheets.

gknott 05-18-2010 7:37 AM

HDPE. Something thin is all you need, like 1/8-1/4", if there is a plywood base. If there is no plywood base you should use like 1/2"

the_fish 05-18-2010 11:36 AM


Originally Posted by hyperlite (Post 1586466)
trex......or pvc sheets.


hyperlite 05-18-2010 12:28 PM

also make sure all your wood is PT. otherwise youre wasting money cause your shizzzzz is going to rot fast

jbwaken 05-23-2010 12:38 PM

i have 1/2" 3x7 white poly pro sheet that seems to work great.

wkskbk 05-25-2010 6:32 AM


Check out this stuff, I am building my slider with this HDPE/ALuminum

This is an aluminum backed plastic. You screw down the aluminum, then slide on the plastic over the top of the screws.

chrishopf 05-25-2010 7:07 AM

anything plastic under 1/2inch thick will bubble in between srews once layed out in the sun.. I would recommend using 3/4-1 inch thick if you can afford it, and Treated Wood is a must for long term hits!


All times are GMT -7. The time now is 10:00 PM.