WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Ronix Cells on LF Watson - Issues? (http://www.wakeworld.com/forum/showthread.php?t=779205)

robertgwi 05-05-2010 12:54 PM

Ronix Cells on LF Watson - Issues?
If I am putting 09 Cell boots on an 09 Watson board, am I going to have issues with the Ronix binding screws / cam locks?

jason95gt 05-05-2010 5:08 PM

If the boots are a size 10, you are going to have lots of problems and should sell them to me.

They are fine, just might need a spacer/washer if the screw is to long.

hawkeye7708 05-05-2010 5:34 PM


I posted this up a few days ago... didn't get much for hits, but this chart should answer your questions pretty well!

hawkeye7708 05-05-2010 5:36 PM

From what I can see, there shouldn't be any issues as far as stance options go. Both use a 6" pattern, boot and board. Might be a SLIGHT screw depth discrepancy, but more than likely, they'll work just fine with screw depth and you WILL have all the stance options.

robertgwi 05-05-2010 8:27 PM

Ha - Thanks for your help. They are a 10. If for whatever reason they don't work out for me, I'll shoot you a message.

ironj32 05-06-2010 7:57 AM

works just fine...i rode that setup last year.

stang_killa_ss 05-06-2010 2:02 PM

i had to grind a 1/16" off the end of the screws, for some reason most ronix screws are too long for LF board inserts. i had to do this for my 09 reliks on 09 watson. i know several other guys on WB.com had to do the same with ronix on LF

All times are GMT -7. The time now is 4:26 PM.