WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Wet Sounds Project Completed (http://www.wakeworld.com/forum/showthread.php?t=778870)

colombiansurfer 04-26-2010 9:31 AM

Wet Sounds Project Completed
10 Attachment(s)
Here are the pics fro my stereo project. It took a few weekends and many trips to Lowe's that they know my first name now. All of this went in an Centurion Avalanche with the Evolution tower. The tower was a PITA but got it completed. Thanks to the Hydrotunes people, Tim White and crew for lending out some advice on my project.

2 WS Syn 4
1 Pair WS Pro 80's
1 Pair WS MB-8's
1 WS 420 EQ
100' of JL 12 GA Wire
1 Fused Distribution Block 4 in 8 out
1 Ground Distribution Block 4 in 8 out
10' 4 GA JL Wire
20' 8 GA JL Wire

lecter098 04-26-2010 10:30 AM

Nice, the charger you have. You have some spacers between the charger and the wall, what are the spacers and where can I get those?

bawshogg 04-26-2010 10:39 AM

Those are just nylon spacers. Most any reputatable hardware stores have them. Ace usually has a good selection of that kinda stuff.

Matt 04-26-2010 10:56 AM

Looks sweet man, I started laughing when you said they know you by name... My local hardware store guys laugh at me everytime i come in...
"Still workin on the boat I see"

colombiansurfer 04-26-2010 11:14 AM

Matt, I get the same and visit the store so much, that I tell other customers where to find stuff and on which isle.

The spacers are white nylon. I used them because I have read and heard that the charger gets real hot and by the boat being in the garage during the summer and no AC, I figured it could use some air circulating to help keep it a little cooler. I used 1/2" spacers for the top and bottom. It helps.

skongolf 04-26-2010 11:31 AM

What size amp power wire did you use?

hatepain 04-26-2010 2:03 PM

Looks like 4 AWG in to distro and 8 AWG out to amps.

Awesome job david it looks really sharp. love the whole set up.

WS got the new grills right on the tower speakers.

colombiansurfer 04-26-2010 5:52 PM

Steve - HateNPain is correct. I used 4 GA instead of 1/0 because my batts are, as you can see in the pics, about 3 feet from the amps. If they were 10' plus then I would have used the 1/0. I used the JL 4 GA and JL 8 GA. great wire BTW and it has 2 sleeves. At first I was WTF is this and how hard it was to cut, but once you figure it out, then it is a snap. It also made it easier to pull through the tower since the inside is rough and the outer sleeve protects the inner sleeve.

Thanks Hate on the compliments. All I have to say is Attention to Detail!!

All times are GMT -7. The time now is 11:28 PM.