WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Slider Plastic? (http://www.wakeworld.com/forum/showthread.php?t=778813)

wkskbk 04-23-2010 1:13 PM

Slider Plastic?
 
Has anyone seen this stuff yet? www.railwerx.com Pretty sweet, They make a screwless HDPE plastic for ski hill terrain parks.
Makes sense for wakeboarding, I assume it would work, better than catching myself on the seams of our PVC rail!

How do you post a pic I tried to get one from their website, I'm not very good at the whole linking thing.

clearlakescott 04-28-2010 7:46 PM

That is some great stuff. TSR is listed on their website. It looks expensive

benbuchholz 04-28-2010 10:50 PM

The ArmorGrind on that website is an awesome idea. It's still way expensive, I read it somewhere but don't remember. i wanna say $500 for a 4 foot sheet

ilboarder12 04-28-2010 11:50 PM

i asked them bout the price of 2 8ft pieces of the .1 HDPE armorgrind and the aluminum track and they said $52 plus about $45 for shipping. not horrible, but not cheap enough for a college student like myself

chrishopf 04-29-2010 5:32 AM

Am I missing something here? .1 HDPE is super super thin and from my experience with plastics it would very easily bubble under the sunlight.

wkskbk 05-03-2010 6:51 AM

I doubt it would bubble because the t's on the plastic are locked into the aluminum track!

I see they have pics of a wallride at a ski hill with the .1" HDPE. It looks like they make .2" HDPE and .2" UHMW but that would be over kill!

dizzyj 05-03-2010 8:45 AM

I just coated my slider with hdpe. got a 4x8 sheet for $120 1/2" thick. and I just counter sunk bolts.

wkskbk 05-03-2010 10:53 AM

Yep, HDPE is good stuff , However I've seen first hand what a screw that backs out of a counter sunk plastic though, Messed up my buddies face up bad and the board worse when he caught his front edge on a boardslide.

dizzyj 05-03-2010 11:11 AM

didnt use screws. I used bolts.

wkskbk 05-25-2010 6:24 AM

I am making a box 24'long x 18" wide with the thicker ArmorGrind its about a 1/4" thick. It's gone cost $330 for the plastic and the aluminum. And about $40 shipping. It would have been $208 if I wanted to go with the .1". Its gonna be beefy


All times are GMT -7. The time now is 6:13 AM.