WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Tsunami Pump Fuse Question (http://www.wakeworld.com/forum/showthread.php?t=778230)

pnichols 04-05-2010 11:53 AM

Tsunami Pump Fuse Question
 
Does anyone have one of these? If so would you mind looking to see what fuse it takes? Mine went over the side in Norris last Sept and the fuse blew up and I lost the part that showed what size! Any help is greatly appreciated

bremsen 04-05-2010 12:47 PM

I don't know what FH uses but the tsunamis don't draw much. I think I used a 5 or 8 amp on my homemade pumps.

mc_x15 04-05-2010 12:48 PM

same thing happene to me. i went to radio shack and bought a replacement one right off the shelf.. The fuse from what i uderstand doesnt really matter. But after saying that, my pump now totally sucks and i replaced it. I called flyhigh and they told me that you dont need a fuse. Seemed strange. Hope that helped.

mc_x15 04-05-2010 12:51 PM

to be alittle more clear i bought a replacement plug and wire and hardwired it into the pump. I think i got the wrong amperage though.

thesack 04-05-2010 1:00 PM

Depends on which model Tsunami pump you have. As listed on the installation instructions on attwood's website the fuses are: 500 - 2.5 amp fuse; 800 - 4 amp fuse; 1200 - amp fuse

pnichols 04-05-2010 1:47 PM

^^Thanks

thesack 04-05-2010 1:50 PM

You're welcome...and since I didnt catch it earlier the 1200 is a 5 amp.


All times are GMT -7. The time now is 8:08 PM.