WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   New board but old bindings? (http://www.wakeworld.com/forum/showthread.php?t=778134)

zburns 04-01-2010 12:43 PM

New board but old bindings?
 
I'm was looking at buying an 09 Lyman off of ebay but i wasn't sure if they changed the hole patterns on the board. I like my bindings i have now, the first hinge CWB Torqs but wasn't sure if they would fit a newer board.

cocheese 04-01-2010 2:07 PM

There is a good compatibility page at evogear. Here is a link.

http://www.evogear.com/wakeboard-and...formation.aspx

dyost 04-01-2010 10:10 PM

Zach,

LF changed the hole patterns as follows:
2008 - from 8" to 7"
2009 - from 7" to 6"

There is an adapter plate you can get from LF which allows more stance options when matching boots and bindings from these differet years. The info used to be on the LF website, but I can't seem to find it now.

cocheese 04-02-2010 8:14 AM

Will the adapter plate work with CWB bindings? He has CWB bindings with an 8" pattern and a 09 Lyman board with a 6" hole spacing. By looking at the evogear charts, I think they will fit, but in only one or two stance options.

zburns 04-02-2010 12:56 PM

Thanks for the help, I think I might go ahead and buy the adapter plate just to be safe

bmr82 04-03-2010 1:39 AM

I was able to get to my 08 Ronix ones on my 09 lyman. but only one stance width. Good thing for me it's where I like it and it covers the other holes so looks pretty slick.
http://i343.photobucket.com/albums/o...82/Picture.jpg


All times are GMT -7. The time now is 9:28 AM.