WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Need ideas on customizing side pouch (http://www.wakeworld.com/forum/showthread.php?t=777638)

deltabri 03-17-2010 3:30 PM

Need ideas on customizing side pouch
 
1 Attachment(s)
I would like to install some cup holders and build out the back of this area. Would love to see pics.

As it is now, there is a nylon mesh with tension on the top of it to keep things secure. The back part is plain just vinyl (removed in pic). Thanks all!

piggie 03-18-2010 12:52 AM

1 Attachment(s)
After ;) Please excuse my poor attempt at photo shop lmao im no pro ..

sammm724centurion 03-18-2010 9:16 AM

http://z.about.com/d/powerboat/1/0/z...efreshment.jpg

tsteeb 03-18-2010 11:11 PM

That is awesome!

denverd1 03-19-2010 1:01 PM

rip that mesh out, get some marine plywood and cut out the holes. cover with carpet and flush mount it so that the top of the cupholders is even with or just below the edge of the pocket. You may have room for a speaker or two in there as well.

denverd1 03-19-2010 1:07 PM

http://www.onlyinboards.com/Images.a...&ImageID=33426
this one is better:
http://www.onlyinboards.com/Images.a...&ImageID=33672

they make chrome or SS cupholders all day long. ebay or skidim.com

edit.
you could rhinoline/linex it for a different look

wake26 03-19-2010 2:36 PM

your boat looks like a centurian. I had a 01 elite v that had the same side panels I cut a custom piece of wood and cut holes for the cupholders think I fit 3 or 4 on each side covered the wood in carpet then I used the vinyle that was along the back and ran to the back of the wood turned out pretty good. I will have to see if I can dig up the pictures.

wakemania 03-19-2010 4:24 PM

Jaron, please post some pics. I have an 03 Elive V that I'm wanting to do the same thing with.

audionly101 03-19-2010 5:50 PM

The netting is all loose and nasty on my Elite V too . I would love to see your pictures of the cup holders. I was trying to figure out how to stuff a Alpine marine baffle mounted sub in there... But the cup holders sound like a better use of the space.

deltabri 03-21-2010 4:00 PM

I think I am going with the NOS idea.....NOT. Ya if there are more pics out there, lets see them. Good ideas so far.

wake26 03-23-2010 7:51 AM

2 Attachment(s)
these are the only ones that i could find hope they help!!

denverd1 03-23-2010 8:45 AM

Throw some LEDs above the cupholders for a little effect. Better yet, put the lights under the cupholders or you could get some plexi rings made for each one. Just to snazz it up a bit.

camassanger 03-23-2010 8:50 AM

Where do you get the LED's for sumpin like that. That is a great idea - i was thinking about putting them behind the top of that compartment, but on the cupholders sounds great too.

denverd1 03-24-2010 12:33 PM

see this thread for some ideas on plexi rings and LEDs. http://www.wakeworld.com/forum/showthread.php?t=777812

most folks are using www.superbrightleds.com/ for the lights.


All times are GMT -7. The time now is 9:25 AM.