WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Rope Length, Speed, Ballast, Wake Plate (http://www.wakeworld.com/forum/showthread.php?t=775990)

jd7bball 02-21-2010 11:32 AM

I'm riding behind a '07 Mobius LSV. It came with factory Gravity III ballast system and the wake plate. what length should my line be, how fast should I be riding and what is the best combination of ballast and trim???

hillbilly 02-21-2010 12:04 PM

70-75 line length. <BR>I would think 20 or a little faster would be a good speed. <BR>And since I don't know how everybody reads there gauge for the plate mine is barely above the back line towards the back of the gauge. But I run way more than stock ballast....So you could try closer to the middle of the gauge. <BR> <BR>One bit of advice....when you find a good spot for the plate,DON'T MESS WITH IT ANYMORE....Or you will be screwing up the wake all the time. <BR> <BR>Or at least that is my experience with my 07 LSV <BR> <BR>I know I confused you . But maybe it will help?

jd7bball 02-21-2010 2:16 PM

thanks jeff, right now im riding with a 60ft rope plus the handle, being towed at 21.5 with 50-60% wake plate and all the ballast filled. im just having problems floating my airs and grabs.. i dont know. any suggestions on improving my ballast??

dyost 02-21-2010 3:33 PM

A friend of mine back in Kansas City has one. I can't tell you exactly how we weighted it other than to say it was slammed. Don't know where we had the plate either... I can tell you that boat has potential for a great, steep wake.

brainrinse 02-21-2010 3:57 PM

I like 75 feet, 22.5, wake plate right in the middle, bags full.

brainrinse 02-21-2010 5:16 PM

Sorry for the low res pic <BR> <BR><a href="http://i49.tinypic.com/2rdjj10.jpg" target="_blank">http://i49.tinypic.com/2rdjj10.jpg</a> <BR> <BR>(Message edited by brainrinse on February 21, 2010)

hillbilly 02-21-2010 5:43 PM

Well I put 750's in the back and run a triangle sac on top of my seats in the bow. I had to upgrade my prop also. <BR> <BR>If you can find a cheap fat sac or two,Put it in the walkway or on top of your seats in the bow. The LSV likes weight in the nose. <BR>You can always go a really cheap route and just buy bags of quickrete and put it in a plastic bag and wrap it in duct tape and put under your cushions. A cheezy but cheap way to get extra weight. I used to run a couple under the bow of my old Nautique. <BR> <BR>d powers your wake looks good, I know my speedo's are off so I just go by rpm since I use ez-cruise and we ride about 36-38.5k rpm???

tailgate 02-22-2010 8:50 AM

Dizzy, its all personal preference... <BR> <BR>I have the 750's in the back of my 08, and put ~800 in the bow/middle on top and front of the integrated 400, some of my crew ride at 70 while some ride at 75, one guy rides at 80... 20-24 mph <BR> <BR>you just have to play with the plate to get the wake shape you want... the more plate, the more of a lip/peak the wake has if I remember correctly, I don't mess with it all that much...

jd7bball 02-22-2010 10:56 AM

thanks you guys.. yeah i remember the wake size get pretty ridiculous when I have a few people riding the nose of the boat. thats really the only time I can pull off a back roll. So I will try and get a couple fly high cubes and the pump and weigh down the front. we'll see how that works.

stang_killa_ss 02-22-2010 11:42 AM

03 moomba LSV <BR>60' plus handle <BR>21.7mph <BR>plate only 1/4 of the way up <BR>upgraded rear sacs(450s i think) <BR>stock center locker sac <BR>no body in the boat but driver


All times are GMT -7. The time now is 11:04 PM.