WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Wakeboard rack designs (http://www.wakeworld.com/forum/showthread.php?t=754415)

bfnaci 01-05-2010 7:39 PM

Guys, <BR>I just built my boat garage, I'm so freaking stoked...finally. <BR>I want some really nice wakeboard racks that I can mount on the wall and just transfer boards from the boat tower to the wall racks. <BR> <BR>I was hoping some of you might be years ahead of me and have great ideas for a rack design. <BR>If you do please share.. pics would be great. <BR> <BR>Brent

jmcdanie 01-06-2010 6:53 AM

Brent, <BR> <BR>There are tons of ways to mount your boards in the garage. I will be working on a rack myself sometime in the future (maybe not until summer though). Here are a few links to different types people have posted before that I was looking at. <BR> <BR>Some one made a suggestion that when you put them in the garage, put them at the height of the boat (so you can put them in and out of the boat easy, instead of putting them lower to the floor). <BR> <BR>Good Luck! <BR> <BR>I like the ones that HITMAN has at the bottom of this post: <BR><a href="http://www.wakeworld.com/MB/Discus/messages/65921/45703.html" target="_blank">http://www.wakeworld.com/MB/Discus/messages/65921/45703.html</a> <BR> <BR>Here are some others, that seem they would be more out of the box: <BR><a href="http://www.wakeworld.com/MB/Discus/messages/65921/462775.html" target="_blank">http://www.wakeworld.com/MB/Discus/messages/65921/462775.html</a>

brett564 01-06-2010 11:05 AM

I have 5 of these mounted on my garage wall, directly above each other, from 2 feet off the ground to about reaching height. They hold the boards at about a 45 to 55 degree angle against the wall. They look and function great, and they fold up when no boards are there. They are very easy to install because all you have to do is find 1 stud in the wall. <BR> <BR><a href="http://www.lowes.com/lowes/lkn?action=productDetail&amp;productId=302680-923-STFSR13&amp;lpage=none" target="_blank">http://www.lowes.com/lowes/lkn?action=productDetail&amp;productId=302680-923-STFSR13&amp;lpage=none</a> <BR> <BR>The funny thing is they are made for bicycles, but the edge of the board fits so well at the padded end, you would think they were made for wakeboards.

wakereviews 01-06-2010 11:24 AM

That is exactly what I have in my garage as well, works great.

All times are GMT -7. The time now is 6:12 PM.