WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   PZ3 vs Napa Gold 1042 (http://www.wakeworld.com/forum/showthread.php?t=749055)

latviaman 11-26-2009 7:07 AM

I have a 99 Mastercraft Maristar with the Indmar LS1 Corvette Motor. I was confused on what Oil Filter to Purchase, the one on now is a aftermarket one. I called Inmar and he says use the PZ3. Great, but I go to the Indmar website the manual says, All 5.7 Liter except LS1 - Pennzoil PZ3, If it is a LS1 - NAPA Gold 1042. Any ideas why he (Indmar) says PZ3 and the manual 1042. Last Question I am not sure what tranny/vdrive I have. I think I have the Midships Mount: ZF Hurth Marine In-Line, but am not sure. Thanks in advance

wakeboardsam 11-26-2009 7:10 AM

I thought this thread was going to be about wine...

mattscraft 11-26-2009 7:13 AM

Go over to MC team Talk for this question, the PZ3, same spec as my Indmar MCX, uses a NAPA Gold 1069, or if you want the larger one, which many use on this engine get the 1060.

sp0tts 11-26-2009 8:13 AM

I have a newer Malibu with an Indmar engine and my manual recommends the PZ3, but I use the Napa 1069. Pretty sure consensus on the Malibu site was the 1069, can't remember all the reasons, but it boiled down to it being a better filter. Bottom line, there are a lot of filters that will fit and the PZ3 is acutally the same filter as a couple competition filters (Fram possibly, I don't remember though)...

latviaman 11-26-2009 8:19 AM

Thanks for your responses, I created a new account with team talk and posted there. I was just a little concerned on sizes. Mallory on now is one size, 1042 is another size, the Pz3 is another size. At least I am not in a hurry. Thanks again.


All times are GMT -7. The time now is 10:51 PM.