WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakesurfing (http://www.wakeworld.com/forum/forumdisplay.php?f=87668)
-   -   Current paint attempt... (http://www.wakeworld.com/forum/showthread.php?t=727367)

surfdad 08-19-2009 4:40 PM

So I had a plan to make a new board for every contest this year and make the podium at each <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> So far I'm on track with the TWC and Nationals, I'm hoping I can finish one for the NWWSA event at the end f the month and then I have to ride it well enough! <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> <BR> <BR>So here is my idea. I'm just really liking custom car paint schemes where it wraps the rails and cntinues top to bottom, the bottom only graphics or discontinuance seems pedestrian to me <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> <BR> <BR>This is what I'm copying: <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/727368.jpg" alt="Upload">

surfdad 08-19-2009 4:46 PM

I couldn't quite match the colors, but at least I found red, green and black! <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> I'm going to have the green at the nose, hoping for just under 1/2 the length with the red at the tail. The transition between the green and red will be gloss black. <BR> <BR>I think that the process will be: <BR> <BR>1) Prime <BR>2) Lay down the green <BR>3) Mask the green I want to keep <BR>4) Lay down the red <BR>5) Using the matching off cut from the green masking, mask off the red, leaving 1/4" for the black <BR>6) Lay down the black on the transitions <BR>7) Peel all the tape off and clear coat it. <BR>8) Make the podium at the end of the month <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0>

surfdad 08-19-2009 7:32 PM

Bagging the bottom layer a few days ago. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/727456.jpg" alt="Upload">

surfdad 08-19-2009 7:38 PM

Every shaper needs a true and faithful shop dog. Nothing says shop dog like an EPS butt. <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/727460.jpg" alt="Upload">

surfdad 08-19-2009 7:43 PM

I've already installed the fin boxes and done the bottom hot coat, this is the deck hoat coat curing and hopefully, I'll be ready to lay down the primer tomorrow. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/727464.jpg" alt="Upload">

surfdad 08-19-2009 7:44 PM

Getting my paint booth ready! <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/727467.jpg" alt="Upload">

ragboy 08-19-2009 10:27 PM

I used to do paint jobs like that but from the inside out for RC cars a long time ago. It was fun. But if you screwed up, you just bought another 10$ transparent body. That looks like a lot of fun, but a lot more difficult. I guess thats why I stick to the computer now, you have the added benefit of gettin high of the fumes. ;-)

tonyv420 08-20-2009 11:14 AM

will you be riding this at the NWWSA Open? or will it be for sale?

hawaj 08-20-2009 4:24 PM

he he EPS butt <img src="http://www.wakeworld.com/MB/Discus/clipart/lol.gif" border=0>

formfunction 08-20-2009 6:28 PM

Jeff,I do paint work if you want to do a little trading on some board work.Let me see if I can drag up some pics.

formfunction 08-20-2009 6:39 PM

<img src="http://www.wakeworld.com/MB/Discus/messages/87668/727774.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/727775.jpg" alt="Upload">

radikal 08-20-2009 7:43 PM

that cadillac in your profile is really nice, if its yours, really nice car man .... <BR> <BR>(Message edited by radikal on August 20, 2009)

surfdad 08-20-2009 8:00 PM

@ tonyv420 - not for sale, I was hoping to ride it at the NWWSA event, but I'm having traction issues, not sure that this board will be ready in time. <BR> <BR>@formandfunction - those are so sweet! I love the wood grain you painted on the roadmaster. Let's work something out! I love your work!

gwnkids 08-20-2009 8:51 PM

Woody<img src="http://www.wakeworld.com/MB/Discus/clipart/blush.gif" border=0>did I just say that. <BR> <BR>Love the chevron and ghost logo - Nice.

ragboy 08-20-2009 11:26 PM

Wow, that is really cool. I would love to get my bike custom painted, but you are in OKLAHOMA!

surfdad 08-21-2009 4:52 AM

I got the primer on yesterday before hitting the lake. I didn't get any pictures, but I laid down the green on the nose last night after returning from the lake. Hopefully, I'll get the green masked tonight, ready for the Red on Saturday morning. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/727891.jpg" alt="Upload">

formfunction 08-21-2009 6:12 AM

Jeff,just give me a call when you get a minute. <BR>Thanks, <BR>Ryan <BR>580-471-1587 <BR> <BR>Wake addict,that Cadillac is not mine I just like the photography. <BR> <BR>Ragboy,I am suprised you have time to ride a bike with all the surfing you guys do <img src="http://www.wakeworld.com/MB/Discus/clipart/lol.gif" border=0>Mine just sits so I don't have much room to talk.

timmyb 08-21-2009 7:36 AM

Brock - nice stuff!

ragboy 08-21-2009 10:25 AM

@brock, NK! But I ride in the fall and spring. Also, I ride on the weekend some, because I am on the lake on the week, stay away from weekend crowds.

smedman 08-21-2009 11:10 AM

Hey Jeff, <BR> <BR>Haven't been on the board much this summer, but everytime I check in - you are up to another cool project! Good stuff

surfdad 08-21-2009 7:00 PM

Hey Matt, good to see you again. I hope all is well with you and yours, and thanks for the compliment. <BR> <BR>Ryan thanks for the contact info. <BR> <BR>The board with the green laid down. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728077.jpg" alt="Upload">

surfdad 08-21-2009 7:02 PM

I use a scrap of skatelite for laying the masking tape down on, nothing sticks to that stuff. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728080.jpg" alt="Upload">

surfdad 08-21-2009 7:03 PM

The bottom and deck masked <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728084.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728085.jpg" alt="Upload">

surfdad 08-21-2009 7:07 PM

The offcuts that I'll use to match the masking above so that I can put a black "pinline" around the transition. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728089.jpg" alt="Upload">

surfdad 08-21-2009 7:08 PM

A coat of red laid down. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728092.jpg" alt="Upload">

ragboy 08-21-2009 10:14 PM

That is looking pretty cool.

surfdad 08-22-2009 7:45 PM

Thanks Robert, we'll see when I unwrap it! <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728266.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728267.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728268.jpg" alt="Upload">

bac 08-22-2009 8:30 PM

Can't wait to see it!

surfdad 08-22-2009 8:58 PM

Here it is! Not as good as the professional car paint, but not bad for my side pasture <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728347.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728348.jpg" alt="Upload">

ragboy 08-22-2009 9:06 PM

Looks like a chili pepper! I ate at Chilis with family tonight, maybe it's just on my mind. <img src="http://www.wakeworld.com/MB/Discus/clipart/wink.gif" border=0>

surfdad 08-22-2009 9:12 PM

It sort of does. <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728351.gif" alt="Upload">

hawaj 08-23-2009 9:42 AM

I guess that original design simulate teared paper effect. Its hard to cut it by hand. Wonder how pros do it? Scan teared paper and cut it on a plotter? <BR>Any ideas Brock?

surfdad 08-23-2009 8:02 PM

There is a good video, I think on YouTube, the artist drew the tears by hand on the masking tape and then cut it out using a single edged razor...the big difference between him and me is that he has TALENT and I'm a hack. <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0>

surfdad 08-23-2009 8:11 PM

We got a chance to take it out for a quick test. It rode well, solid build and shape <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728515.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728516.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/728517.jpg" alt="Upload">

surfdad 09-05-2009 7:48 PM

I did it! I podiumed in WA, so I met my goal. Dennis got a chance to ride it now that the ontest is over. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/87668/731904.jpg" alt="Upload">


All times are GMT -7. The time now is 8:14 PM.