WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through July 28, 2009 (http://www.wakeworld.com/forum/forumdisplay.php?f=722033)
-   -   Buffer and Supplies (http://www.wakeworld.com/forum/showthread.php?t=719294)

clb 07-23-2009 7:09 PM

Where do you guys get your buffer and supplies. I started at Home Depot but only found grinders, which I guess it the same thing, but very little buffing supplies? I just finished up with some 2000 wet sanding on a few scratches now need to move on the 3M Finesse-It and then the Marine Color/Gloss Restorer, followed by a good waxing. <BR> <BR>Do you order online? Any recommendations on a buffer and what supplies I would need to complete this job?

mac_attack 07-23-2009 7:27 PM

I ran across this info and saved it to send to a friend that bought a boat with a faded gel coat. There is good info spread out if you feel like reading through it. <BR> <BR><a href="http://www.tmcowners.com/teamtalk/showthread.php?t=31221" target="_blank">http://www.tmcowners.com/teamtalk/showthread.php?t=31221</a> <BR> <BR><a href="http://www.mastercraft.com/teamtalk/showthread.php?t=29296" target="_blank">http://www.mastercraft.com/teamtalk/showthread.php?t=29296</a> <BR> <BR><a href="http://www.mastercraft.com/teamtalk/showthread.php?t=12550&amp;highlight=restoration" target="_blank">http://www.mastercraft.com/teamtalk/showthread.php?t=12550&amp;highlight=restoration</a>

kko13 07-23-2009 7:28 PM

Napa auto parts stores has a nice selection.

murphy_smith 07-24-2009 6:22 AM

Cooper, I see that you are in Dallas, TX and so am I. <BR> <BR>I would take a look at 3m perfect 3000 rubbing compound (3m 06060) to remove those 2000 grit scratches. I would use a wool pad to remove the scratches. <BR> <BR>You are going to have to work very hard with the finesse-it to remove those scratches. After the 3m perfect 3000 you can decide if you want to use the finesse it. IF you do, switch over to a foam pad. I did not have to when I did mine this summer. <BR> <BR>Look up English Color here is Dallas. They can get you what you need (Compound, Polish, Backing plate and pads) <BR> <BR>Check out Northern Tool, I think they have a couple of stores in DFW. I picked up a polisher for under $40 and it works great.


All times are GMT -7. The time now is 3:17 PM.