WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through July 28, 2009 (http://www.wakeworld.com/forum/forumdisplay.php?f=722033)
-   -   Heated Water Coming From Heater? (http://www.wakeworld.com/forum/showthread.php?t=718937)

green_johnson 07-22-2009 8:18 PM

It looks like the heater is leaking heated water out into my boat. Anyone have any suggestions as to a quick fix? If not I understand I could take out the heated water line coming from the engine and scrap the heater all together, but I'm not quite sure as how to shut off the flow. <BR> <BR> <BR>By the way the boat is a 2005 Tige 20v.

jtnz 07-22-2009 8:35 PM

You should be able to get plugs for the block. Failing that you can cut the hoses and join them together. Use a piece of pipe to join them and crank some hose clamps onto it, shouldn't leak. <BR> <BR>A third way is just to find bolts that fit the hoses and screw them in. We use that as a temp fix for plugging fuel lines etc sometimes. <BR> <BR>Quick fix rip out the core and see if you can get it welded at a radiator shop. <BR> <BR>(Message edited by jtnz on July 22, 2009)

antoddio 07-22-2009 9:12 PM

Go to home depot, buy two 1/2 inch shut off ball valves and four 1/2 inch to 5/8 inch hose barbs. Cut the hose by the engine and splice those in. VERY EASY to do. <BR> <BR>Don't mess around with plugging the engine, that will be a lot of work in tight quarters.

chris_schweda 07-22-2009 9:28 PM

i cut a half inch copper pipe spliced it then went to autozone 30 bucks for new coil

jtnz 07-22-2009 9:51 PM

Todd that is true - I forgot the motor is the other way around in a V drive.


All times are GMT -7. The time now is 6:55 AM.