WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 29, 2009 (http://www.wakeworld.com/forum/forumdisplay.php?f=702328)
-   -   help wireing a perko switch 4 second batt. (http://www.wakeworld.com/forum/showthread.php?t=700010)

gabriel63 05-26-2009 9:09 PM

I have a perko switch selecting what battery i want to use. my problem is on the preko switch under it i cant fit every wire that needs to be hot.I want to be able to have the light on my tower be able to be use on any battery.Do they make some thing to turn the four extra wires into one to go to the perko switch.I have wire form stater going there as well. plesase help

mhunter 05-26-2009 9:42 PM

Hook the extra wires at the starter.

johnny_jr 05-27-2009 11:26 AM

Purchase a distribution block and get as many of the wires on the disti block as you can, this should free up more then enough room behind the perko.

gabriel63 05-27-2009 5:28 PM

these both sound like great ideas but going back to the starter is just more work.now going with a distibution block sounds good but where do i found one at.thank for the comments.

chpthril 05-27-2009 6:07 PM

<a href="http://www.waytekwire.com" target="_blank">www.waytekwire.com</a> has remote battery posts. Run a cable from the C terminal of the switch to the remote post and attach all the extras to the remote post.


All times are GMT -7. The time now is 7:01 PM.