WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 29, 2009 (http://www.wakeworld.com/forum/forumdisplay.php?f=702328)
-   -   position of underwater LEDs - 2004 x-star (http://www.wakeworld.com/forum/showthread.php?t=699880)

chrzanowski5 05-26-2009 4:12 PM

Where should I mount underwater LEDs? I wanted to put them to the outside of the exhaust, but that area is not accessible from the engine compartment. They are the bulletlines X6000s. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/699881.jpg" alt="Upload">

cwb121 05-26-2009 6:18 PM

Hey Joe put them in between the exhaust ports. There is easy access to that location in the bilge.

chrzanowski5 05-26-2009 6:53 PM

Bruce, can you email me a picture of the location on the current model year boats? <BR> <BR>thanks

roverguy04 05-26-2009 7:07 PM

<img src="http://www.wakeworld.com/MB/Discus/messages/65921/699955.jpg" alt="Upload">

tride 05-27-2009 5:42 AM

What do you guy's use to seal the hole's for the wire's? silicone or 3m 5200?

cwb121 05-27-2009 6:08 PM

Matt beat me to it.

johny_malibu 05-28-2009 9:48 AM

5200!!!!!!!

Slingshot 05-28-2009 1:03 PM

Use the 5200 fast cure. Slow cure is super runny and messy. Wipe the excess off with rubbing alcohol.


All times are GMT -7. The time now is 4:11 PM.