WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 29, 2009 (http://www.wakeworld.com/forum/forumdisplay.php?f=702328)
-   -   Plumming Fatsacs into a malibu 23 lsv (http://www.wakeworld.com/forum/showthread.php?t=699485)

gotwake123 05-25-2009 9:58 AM

I am trying to connect my fatsacs to my factory ballast on an 07 malibu 23 lsv. Has anyone done this?

liljohn 05-25-2009 5:34 PM

Try the malibu crew lots of people have done it.

eyekahn 05-26-2009 5:19 AM

Take black hoses closest to the seats on the thru hull and plumb into the bottom of sacs using brass/barbed fittings. Then get 4ft(8ft total) of clear 3/4" or 1" hose and connect to top of sac w/ brass/barbed fitting and out the original thru hull. This will fill and empty with stock switches. The sacs are done when 2 streams of water are coming out the back. This will work for the rears but I have seen a few people have a quick connect for a front sac.

hymaeringo 05-26-2009 7:05 PM

just ask DR. J to do it

gwnkids 05-26-2009 7:35 PM

The Piggy back kit has everything you need

All times are GMT -7. The time now is 2:28 PM.