WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Video and Photography (http://www.wakeworld.com/forum/forumdisplay.php?f=87667)
-   -   *Custom-Made Camcorder Handles*Buy One!!!!!! (http://www.wakeworld.com/forum/showthread.php?t=696890)

mikevlx 05-15-2009 9:44 PM

i made this custom "skate" handle for my JVC GZ-HD7. it connects to the tripod mount on the bottom of the camera, and it fits very snug/its not loose at all. This handle makes it easier on the filmer to get those hard-angled videos. you can use this handle for skateboarding, snowboarding, wakeboarding, boating, or just for life-style vidds!!! <BR> <BR>i can make a custom one if you would like me too, all i need is what kind of camera you have, and i can make one from there! i also custom paint them! the handles are made out of very sturdy metal, so they wont break or bend on you! <BR> <BR>i screw a hole on the bottom of the handle so that it fits your camera's tripod mount perfectly...AND the bolt i include also fits PERFECTLY! it screws in easily and tightens very nicely! <BR> <BR>FYI:i am not scamming here. why would i try to sell something i have never used? this handle worked for me, so im trying to see if anyone would be interested in buying something the could easily improve your video-taking! <BR> <BR>included with this: <BR>-1 custom built AND painted handle <BR>-1 set of hardware(1 soft pad, 1 washer, 1 bolt) <BR>-1 piece of foam to wrap around the top of the handle (where you hold it). <BR> <BR>i will email you the 2 step instructions after you purchase it. (because this thread is already lond enough). <BR> <BR>i am asking for 24.99 a handle with everything included; custom paint-job and shipping is FREE! <BR> <BR>email me with questions, comments, concerns <BR><a href="mailto:mikevinckier93@hotmail.com">mikevinck ier93@hotmail.com</a> <BR> <BR> <BR>****none of my pictures were allowed to be uploaded on wakeworld for some dumb reason, so i will just email whoever is interested! i am legit, and i have legit pictures********

richd 05-16-2009 7:33 AM

<img src="http://www.wakeworld.com/MB/Discus/messages/87667/696923.gif" alt="Upload"> <BR> <BR>Just resize your pics to no more then 1000 pixels and under 150 kb and they should upload/post.

mikevlx 05-16-2009 9:24 AM

when i resized them, there was practically nothing to see in the picturess...

mikevlx 05-17-2009 6:55 PM

<a href="http://photobucket.com/handle_album" target="_blank">http://photobucket.com/handle_album</a> <BR> <BR> <BR>this site is of one of the handles i made. its a sick handle. i can/will screw extra holes in the bottom of the handle just in case one wont cut it. only have 3 left, so the next 3 buyers will get it for 20 dollars shipped!

richd 05-17-2009 7:16 PM

My camera already has a handle but it's looks good for someone who doesn't.

mikevlx 05-17-2009 7:36 PM

yeah man, its for the cams that dont have the handles like the gl1 or dvx do. there nice and sturdy to. These handles are way better than holding the camcoder with your bare hands because bare-handed gives you all shakey footage.

mikevlx 05-25-2009 1:24 PM

anyone want one for cheap?!!!?!

All times are GMT -7. The time now is 5:30 AM.