Hey guys im trying to get my surf wake dialed ! Its a 08 VLX and i cant get it correct IMO what you guys think. We are new maybe its the technique but we can get the wake to push us ..... what did you guys change in that wake ? <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/696741.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/696742.jpg" alt="Upload">

What weight where? What speed? <BR> <BR>From the looks I would say more in the front and maybe a bit faster. You should really post this in the wakesurf forum, those guys are SERIOUS about dialing boats in. <BR> <BR>(Message edited by Ralph on May 15, 2009)

Speed up a bit and it will clean up. Might throw a little more weight over there too. I think the biggest thing is a touch more speed though...

you should still be able to surf that. My money says technique.

i had 750 pounds in the rear locker, 750 on the back seat , 500 in the bow all on the left side of the boat. + Factory ballast full except for the right side that was empty for sure. Speed i was about 9.7mph

ohh yeah i cant put more weight it already goes just over the rub rail !! :p

Yeah I would try to do about 12 mph. I have a lot of weight in my MB and that what speed we run. Oh and some advice on picking up your rider back through the big rollers! I will sink my boat if I try to turn the boat around.

I run about 1200# in an Enzo sac at approx 12.3 mph.

Just a lil too slow 10-12mph. Looks like it'll clean right up and DANG that baby is leanin lol.

I run the same weight plus full wedge and a 500# along the seat on the floor. This is my LSV at 11.8 MPH <img src="http://www.wakeworld.com/MB/Discus/messages/65921/696777.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/696778.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/696779.jpg" alt="Upload">

when i try to go faster it seem like the boat return to a center weight position or even the wake turn to be on the opposition side its kinda weird !!

Yea the chine wants to push you opposite of the weight, but that only happens when we slow down to pick up the rider. Does it pull like that with just the normal wakeboard weight?

drive from the passenger seat. i shoot for around 10.6-11 depending on weight and full wedge. remember to put everyone on one side. }

I agree with ringo.....but dont forget to have the peeps jump back to the other side when turning to pick up the rider.....or you will capsize and sink....lol

I heard if you buy a Mastercraft it should clean that wake right up. <BR><img src="http://www.wakeworld.com/MB/Discus/clipart/biggrin.gif" border=0>

The first pics are poor surf wakes. We ran a VXL for the 2006 Scioto Wakefest. It seemed like every weight combination was a winner, none as bad as the above. <BR> <BR>One thing we didn't use was the wedge. Every post I see about Malibu surf setups use the wedge, though. I'm not a Malibu guy and this was like three years ago, sorry I can't be more help.

I agree with the speed 10.5 to 11.5 <BR>weight sounds good <BR>sometimes we wedge, others we don't <BR> <BR>also <BR>we only fill the center half full <BR>we get a better wake that way <BR> <BR>i also run 4 to 6 40 pound pop bags in the bow, along with factory <BR> <BR>the bow bags are evenly distributed <BR> <BR>hope that helps

so cliff around a maximum of 240 in the bow but not all the same side , you put it everywhere ... am i correct ?

Center half bow None and tons of weight in the one locker. All the adults on that side as well and kids in the bow. Mine is sweet. Try to dig that back side into the water.

Like most have said, it looks like the only problem is the speed. The wake is catching up to the boat and closing out. <BR> <BR><blockquote><hr size=0><!-quote-!><font size=1><b>quote:</b></font><p>You should really post this in the wakesurf forum, those guys are SERIOUS about dialing boats in.<!-/quote-!><hr size=0></blockquote> <BR>Wakesurfing is my main watersport for the last few years, but I find the wakesurfing section here annoying. I never read it, and would probably post any questions I had here too. Just sayin...

Take the weight out of the front of the boat and move it to the center. Make that thing PLOW!

Malibus like nose weight, It lengthens the pocket

Needs weight in the bow to clean it up. <BR> <BR>Here is what I run and the wake is great. I will try to post pics later. <BR> <BR>Bow, center and left MLS full. <BR>750 in surfside locker. <BR>540 on the seat. <BR>350 in the bow. <BR>at least two peeps in the boat <BR>and wedge at about 3/4's

Look its simple, get you some fat chics and move them around and adjust speed till it looks good.<img src="http://www.wakeworld.com/MB/Discus/clipart/lol.gif" border=0>

In my 08 VLX I found out, on accident, that my best wake has been this. <BR> <BR>•All tanks, including non-surf side, full except the center. I fill the center 1/2 to 3/4. <BR>•800lb bag in surf side locker. <BR>•All passengers, including driver, on surf side. <BR>•No wedge. <BR> <BR>Also, as said several times before, speed between 10.5 and 12.

Kenneth in your case why dont just emptying the opposite side and dont put the extra ballast in the rear locker side it will do the same thing IMO no ? <BR> <BR>like this you put a fat sac to neutralise the weight you put the other side .....

look people. more weight along the rail towards the front lenghtens it. if your wake is huge and short add people toward the passenger seat. i never run weight in the bow for surfing, only riding. anyone heard of the shin test? stand on the swim deck till your shins are underwater. just make sure you are not getting water in that vent!!

<img src="http://www.wakeworld.com/MB/Discus/messages/65921/698134.jpg" alt="Upload">

Best setup we've used. <BR> <BR>Speed: 10.4 mph <BR>Ballast: <BR>~ Rear MLS surf side full <BR>~ Rear MLS off side empty <BR>~ Center MLS full <BR>~ Bow MLS full <BR>Wedge down <BR>750 in rear surf side locker <BR>750 on surf side seat in cabin <BR>500 on surf side in bow <BR> <BR>This is a picture from a '06 VLX (Not Mine) but one I've ridden many times. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/698176.jpg" alt="Upload">

is it me or malibudude that a nice looking surfwake !?

If I left the non surf side empty and just didn't use the sack then the angle or lean would be about the same but I would lose over 1K lb.s in displacement. <BR> <BR>Leaving the non surf side empty is really a waste of ballast if you think about it. Obviously you want to lean to your surf side. Sounds like you've got enough weight in additional sacks to make that happen and still be able to use all your tanks. <BR> <BR>Think about it like this. If you had your whole left side's seating filled with peeps, would you kick an extra fat dude off the boat or let him sit in the back on the right hand side?

its not about just adding weight to a spot. its taking weight from one side and moving it to the other. so in essence moving the driver from the stbd to port for a regular surfer will not just add 180 pounds but rather subtract 180 from stbd and add 180 to port so essentially 360 pounds is the actually effecting weight. and btw having non surfside filled is only detrimental to your wake.