WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeskating (http://www.wakeworld.com/forum/forumdisplay.php?f=68124)
-   -   Will This Motor work for a winch? (http://www.wakeworld.com/forum/showthread.php?t=688334)

tl_hereford 04-18-2009 12:31 PM

Has a taperd not keyed shaft, and has a shaft housing. Got the motor for free and a millwright where I work says he can cut off the housing and grind the shaft to 3/4 and put a 5/16 key in it. So do you think it will work? Motor is a four cycle 389cc. <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/68124/688335.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/68124/688336.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/68124/688337.jpg" alt="Upload">

duckdiver 04-19-2009 1:31 PM

hell yeah it will work. thats a big engine.

trevorakers 06-02-2009 9:19 AM

yea should work as long as you can hook up to a torque converter. (you cant with a taperd shaft)

ericlassiter 12-07-2009 4:07 PM

where's the carb, air filter and gas tank?

All times are GMT -7. The time now is 2:51 PM.