WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through November 07, 2008 (http://www.wakeworld.com/forum/forumdisplay.php?f=644838)
-   -   Winch line? (http://www.wakeworld.com/forum/showthread.php?t=641415)

dirwoody 11-01-2008 11:03 AM

For those with winches, have built them, or used them, I have some line questions: <BR> <BR>Where did you get yours? <BR>What's the best place you know of to find one? <BR>How thick did you go? <BR>And how long did you go? <BR> <BR>Thanks!

coreym 11-01-2008 11:38 AM

You can order winch line through you Accurate/Hyperlite dealer. They can order different lengths and types of line. If they don't know they can order this line please have them call Corey @ Hyperlite. <BR> <BR>Corey M @ Hyperlite

wakerider111 11-01-2008 2:58 PM

i hear about bullet lines alot, check this <BR> <BR><a href="http://www.bulletlines.com/winch-rope-1000.htm" target="_blank">http://www.bulletlines.com/winch-rope-1000.htm</a>

andy_nintzel 11-02-2008 8:48 AM

Ken Land at Bullet Lines will hook you up!

romes 11-02-2008 8:51 AM

we've got a couple of thousand feet of proline on ours.

kampus96 11-02-2008 10:17 AM

<a href="http://www.reddenmarine.com/site/new-detail.cfm?id=AMRAMSTLBLU764" target="_blank">http://www.reddenmarine.com/site/new-detail.cfm?id=AMRAMSTLBLU764</a> <BR> <BR>works perfect.

romes 11-02-2008 5:31 PM

good -ish Grantski

lovin_the_wake 11-04-2008 7:26 AM

I 2nd the 7/64" amsteel $h|ts da bomb <img src="http://www.wakeworld.com/MB/Discus/clipart/wink.gif" border=0>

fbmuline 11-04-2008 8:06 AM

I BOUGHT 1000 FOOT OF ACCURATE FOR MINE. GO TO HYPERLITE DEALER. WORKS GREAT. SMOOTH PULL WITH ONE CONTINUOUS ROPE RATHER THAN SEVERAL PUT TOGETHER.

dirwoody 11-04-2008 8:42 AM

How long is too long though? <BR>And what did you guys do for your spools?

romes 11-04-2008 8:48 AM

we have a couple thousand feet on ours. <BR> <BR>pm CIE Al about it he built ours.

dirwoody 11-04-2008 8:50 AM

Sounds good! <BR> <BR>I'll have to post pics once everything gets underway.

dirwoody 11-04-2008 8:50 AM

Also, how many of you guys went with a CVT vs a centripital clutch? <BR>Not sure if I spelled that right

romes 11-04-2008 8:58 AM

make sure you put a torque converter or if you plan on deep water starts.

steezyshots 11-04-2008 9:06 AM

Also 1000 feet of Accurate line on ours, I would go that way. Great line!

bulletlines 11-04-2008 10:15 AM

Darin, <BR> <BR>We have releasing spools and our 2009 Aluminum Pimp Winch frames available. Our releasing spools freewheel on it's own set of highspeed ball bearings when pulling the rope out; nice feature to have so you dont have to pull out rope against the engine. Heres a pic of one of our spools mounted. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/642170.jpg" alt="Upload"> <BR> <BR>Bullet Pimp Winch frames are made of polished aluminum tubing and weigh less than 25 lbs. Ou new frames are just plan pimp. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/642171.jpg" alt="Upload"> <BR> <BR>Ken Land <BR>Bullet Lines <BR><a href="http://www.bulletlines.com" target="_blank">www.bulletlines.com</a>

andy_nintzel 11-04-2008 12:38 PM

KEN HOOK A BROTHER UP WITH A WINCH!!!!!!!!<img src="http://www.wakeworld.com/MB/Discus/clipart/biggrin.gif" border=0>


All times are GMT -7. The time now is 9:11 PM.