WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through June 08, 2008 (http://www.wakeworld.com/forum/forumdisplay.php?f=589922)
-   -   water pump impeller (http://www.wakeworld.com/forum/showthread.php?t=585944)

epic1 06-01-2008 7:13 PM

think mine went today. Where is it? is the water pump the center pully? If it is the impeller, can I upgrade to a brass or something? ford 302. Thanks.

rallyart 06-01-2008 8:05 PM

The water circulation pump is the upper center pulley. The water supply impeller is belt driven on the side of the motor low down. The circulation pump impeller is metal and not likely to fail. The supply impeller is easy to damage because it relies on being covered with water to cool and lubricate it. <BR>If you are overheating it's most likely the supply impeller.

epic1 06-02-2008 10:08 AM

so that suply imp. is the rubber one that often goes out, ant its houseing is has two water lines in and out to it? Thanks.

rallyart 06-02-2008 10:15 AM

That's it.

epic1 06-03-2008 1:03 AM

grasias senior

All times are GMT -7. The time now is 9:31 PM.