WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through September 10, 2007 (http://www.wakeworld.com/forum/forumdisplay.php?f=500459)
-   -   Weekend photos: Gun Lake (http://www.wakeworld.com/forum/showthread.php?t=496992)

mim3 09-04-2007 9:51 AM

I had the pleasure of meeting Ryan and his dad this weekend. A couple shots of Ryan behind the X-45. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/496993.jpg" alt="Upload"> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/496994.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/496995.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/496996.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/496997.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/496998.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/496999.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/497000.jpg" alt="Upload">

helix_rider 09-04-2007 1:01 PM

Mike, nice photos. If I could make some suggestions to you in friendly comraderie... <BR> <BR>The pics are great, and look even better in a stitch job. I did this with photoshop elements in about 10 minutes. You'll notice some areas have different colors of gray. To avoid this, start using the manual settings on your camera. This will keep a consistent shade of gray as you pan across the jump (into likely changes of sunlight). <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/497070.jpg" alt="Upload">

mim3 09-04-2007 1:35 PM

Loren, thanks for the advice. This was my first attempt using the high speed continuous mode. <BR> <BR>I need to upgrade to elements...thanks for the stitch.

helix_rider 09-04-2007 4:02 PM

Elements is fairly cheap. I ended up using Photoshop CS2 because my wife needed it for her work, but I always drift back to Elements just because it is so simple.

ronnyboy27 09-05-2007 8:19 AM

That wake doesn't look that big for an X-45?


All times are GMT -7. The time now is 12:52 AM.