WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through August 06, 2007 (http://www.wakeworld.com/forum/forumdisplay.php?f=487398)
-   -   88 Malibu Sunsetter Pylon LOOSE! HELP! (http://www.wakeworld.com/forum/showthread.php?t=484098)

oldschoolmalibu 08-02-2007 8:38 AM

Got to looking at the support bracket in the motor compartment and they are just lag bolts, bolted into the sides of the bottom of the boat. The bolts are dangling and won't tighten. The only way to get to the back is to tear out the floor and run a bolt all the way through and put a washer and a nut on the end. Looking for an easier fix or a better one. Seems like that shouldn't happen that easily. This has got to have happened to someone before. I would appreciate any suggestions or advice you guys have, because I'm done boarding until because my skylon flops in the wind now......

All times are GMT -7. The time now is 11:10 PM.