WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through July 11, 2007 (http://www.wakeworld.com/forum/forumdisplay.php?f=475214)
-   -   Wakeboard Scratching Transom where Swimstep meets (http://www.wakeworld.com/forum/showthread.php?t=472587)

droon 07-08-2007 8:08 PM

Gel coat on the transom where the swim step meets it is getting scratched as riders put on Wakeboards. Where can I find something to put on the transom to protect it?

wake_upppp 07-08-2007 8:18 PM

google "gatorgrip", i don't know the website by heart

tyboarder03 07-08-2007 8:19 PM

<a href="http://www.wakejunky.com/" target="_blank">http://www.wakejunky.com/</a>

ord27 07-08-2007 8:35 PM

wicked wakes pad <BR> <BR><a href="http://wickedwakes.com/index.php?page=shop.browse&amp;category_id=17&amp; option=com_virtuemart&amp;Itemid=26" target="_blank">http://wickedwakes.com/index.php?page=shop.browse&amp;category_id=17&amp; option=com_virtuemart&amp;Itemid=26</a>

angrygolucky 07-08-2007 9:21 PM

I second the wicked wakes transom saver!

bwood 07-09-2007 4:05 AM

I have a teak platform on my X1 and noticed that Mastercraft sells a teak transom saver. Does it really work or just help out?

dreevs 07-09-2007 6:46 AM

Beauty marks. It is a wakeboard boat isn't it??<img src="http://www.wakeworld.com/MB/Discus/clipart/rofl.gif" border=0>

ceres1312 07-09-2007 7:19 AM

<img src="http://www.wakeworld.com/MB/Discus/messages/65921/472714.jpg" alt="Upload"> <BR>Yes, check it out that is my 06 sanger(v210) not the x-star, they have a picture of. We really like it. The kids sometimes don't pay attention when they are putting on their wakeboards and it would hit the transom. The new protector works great. I got mine through Topside marine in san jose ca give them a call Phone: 408-224-2628

bawshogg 07-09-2007 9:01 AM

3M clear bra on mine, has been great so far. Does'nt change the look of the boat also.

dfwharvey 07-09-2007 10:48 AM

Woody, I have an 06 X1 with the teak transom saver and yes it works like a charm. It blends in nice with the platform however it isnt very tall so if a newbie doesnt know to put the board up against it instead of on top of it you could end up with a gelcoat scratch.

bwood 07-09-2007 11:47 AM

Thanks Nick thats what I wanted to hear.

sjmedic 07-09-2007 3:06 PM

Thanks for the plugs guys! I still need some pics bros! I gotta update the site, just brought home an 8lb wakeboarder! Mom and boy are Fine!

angrygolucky 07-09-2007 3:16 PM

Congrats Howie!!

ord27 07-09-2007 3:47 PM

Howard that's great <BR>congrates! <BR>thanks for the suction cups! <BR>we had the boat sunk goofy side last night past the rubrails <BR>I had to move some guys away from that side....or I woulda had water comin over the side and into the rear locker! <BR>but!!!! <BR>the wicked wakes transom saver never budged! <BR> <BR> <BR> <BR>I keep wanting to get a shot from out on the wake...while the boat is loaded down <BR>but don't have the nerve to take a camera out there with me <BR> <BR>maybe this weekend <BR>later <BR> <img src="http://www.wakeworld.com/MB/Discus/messages/65921/472889.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/472890.jpg" alt="Upload"> <BR> <BR>(Message edited by ord27 on July 09, 2007)

bcrider 07-09-2007 4:03 PM

I just put a strip of 3m across the back of my boat which is clear so you can't even tell it's really there.

sjmedic 07-09-2007 6:50 PM

That works well Dave. I too had some 3M on my transom, but I started manufacturing the pads because I could take them off whenever I wanted to(unlike the tape), they never yellow, they never scratch or gouge, and they will last (hopefully) the life of your boat. I have just recently been able to offer custom graphics on the pads, so I invite you to try one. Drop me a pm if you are inclined!

derby 07-09-2007 7:51 PM

Whooooohoooooo! Congrats Howard!!! What's his name? Does that mean I have to give your lady her board back? <BR> <BR>...end jack

sjmedic 07-09-2007 9:11 PM

HA!! Thanks Derby! Carson Thomas Morton 6-26-07 You got a new boat yet? I got a transom pad with your name (logo) on it!

mkperceptions 07-09-2007 9:19 PM

I used the transomsaver it was on sale at west marine. Works pretty good


All times are GMT -7. The time now is 9:56 AM.