WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 25, 2007 (http://www.wakeworld.com/forum/forumdisplay.php?f=455062)
-   -   Dumb Perko question! (http://www.wakeworld.com/forum/showthread.php?t=452323)

foxrepdc 05-23-2007 2:48 PM

OK.....Batt. 1 cranks, Batt. 2 runs audio...center pin connected to starter....then 1 and 2, ground jumper between batts. <BR> <BR>How do you operate the damn thing?? I want to crank the boat, charge the batts. and be able to switch to batt 2 to power audio and float.

laraujo 05-23-2007 3:48 PM

I just went thru this. I assume you have bat # 1 +terminal going to perko switch T1 and bat#2 going to perko switch T2 with your starter and accessories connected to the perko common terminal. Just turn your perko nob to "all" and you charge/run both bateries. or to 1 or 2 to run/charge from either. What works for me is I have Just my Starter and auto builge line connected to perko common. then I have my amps/accessories connected directly to the positive terminal of T2. That way I always have one battery dedicated to starting that i can switch off when I am just floating/listining to tunes/drinking beer. I then just switch it back to all once started so everything gets charge from alternator.


All times are GMT -7. The time now is 1:12 AM.