WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through December 20, 2006 (http://www.wakeworld.com/forum/forumdisplay.php?f=398151)
-   -   Indmar drain plugs? (http://www.wakeworld.com/forum/showthread.php?t=393962)

tripleup 12-04-2006 5:45 PM

Where are the drain plugs to drain the block on an indmar monsoon?

jon_a 12-04-2006 6:15 PM

you have two brass plugs (sometimes can be knock sensors) on either side of the middle of the block. They should be pretty obvious when you look at your block. If you are winterizing, Remember to drain your manifolds, thermostat housing hose, and your raw water pump housing and take out your impeller. <BR> <BR>(Message edited by Jon A on December 04, 2006)

batman 12-04-2006 6:51 PM

Also if you have ballast pumps, they need a blowout!

cbrown 12-04-2006 9:28 PM

Alex you have one knock sensor and one drain plug on your motor. Other than that follow what jon said and you will be set.

lake_side 12-07-2006 12:41 PM

Why do you take out your impeller.

jon_a 12-07-2006 1:48 PM

It will dry rot.


All times are GMT -7. The time now is 12:37 AM.