WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through November 07, 2006 (http://www.wakeworld.com/forum/forumdisplay.php?f=389780)
-   -   what materials should you use for wakeboard cracks (http://www.wakeworld.com/forum/showthread.php?t=382889)

qtybry 10-24-2006 4:49 AM

hello <BR> <BR>my board got damage at the slider it has a crack on my in board fins. <BR> <BR>whats the best material should i used recine, marine epoxy etc? i heard marine epoxy will crack again.

tylerc 10-24-2006 4:56 AM

I can't speak too much of ways to repair the bottom of the board, however when I cracked my topsheet, I used a product called SunCure to fill it in. Worked super well. Just a thought.

sbt3 10-24-2006 5:57 AM

I have used marglass which is a fiberglass bondo. It seems to work pretty well and can be easily sanded smooth again. You can get it at autopart stores.

otiswunguy 10-24-2006 7:43 AM

I just use bondo if you have to fill anything. On a few boards I have, I have completely rebuilt the fins with bondo after they were shredded off. If it is a crack then you should use some sort of 2 part epoxy or like sbt3 said with the marine fiberglass.

slipknot 10-24-2006 7:48 AM

JB Weld, from auto parts store

bvdievent 10-24-2006 8:31 AM

I cracked the edge of my board about a month ago and repaired it with a 2 part epoxy. Ive ridden it a bunch of times since and have had no problems. I got it from west marine...heres a link. <BR> <BR><a href="http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/10001/33621/10001/96/11160/4" target="_blank">http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/10001/33621/10001/96/11160/4</a>

wakegenie 10-24-2006 2:54 PM

May be this will work: <a href="http://www.buywake.com/catalog/detail/RA_8738" target="_blank">http://www.buywake.com/catalog/detail/RA_8738</a>

qtybry 10-26-2006 1:42 PM

ok thanx guys!!!

qtybry 11-04-2006 12:18 PM

<a href="http://www.buywake.com/catalog/detail/RA_8738" target="_blank">http://www.buywake.com/catalog/detail/RA_8738</a>

texastbird 11-04-2006 1:10 PM

PC7 is a nice 2 part epoxy putty that I have used with good results to fill and patch boards. You can find it at hardware stores.


All times are GMT -7. The time now is 9:56 PM.