WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through July 21, 2006 (http://www.wakeworld.com/forum/forumdisplay.php?f=349637)
-   -   Swim platform padding replacement (http://www.wakeworld.com/forum/showthread.php?t=346202)

cinder1995 07-16-2006 5:25 PM

After hours of pulling the old matting off, it's still covered with adhesive. Should I sand it before putting the new one on or is their something I can soak on it to remove the adhesive?

sroot1 07-17-2006 6:38 AM

3m makes adehesive remover that works well and Is fairly safe to use. But I would think on such a big area enamel rudducer or Laquer thinner would be In order using the old wipe on wipe of method. One wet with solvent the other dry for pick-up.

cinder1995 07-17-2006 6:53 PM

Thanks, that's kind of the direction I was going. Just didn't know if they made something specially for fiberglass.


All times are GMT -7. The time now is 1:12 PM.