WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through June 21, 2006 (http://www.wakeworld.com/forum/forumdisplay.php?f=339308)
-   -   Hifonics Titan TXi amp questions for rookie (http://www.wakeworld.com/forum/showthread.php?t=334880)

dudeman 06-12-2006 7:52 PM

Does the remote control have to be installed for these to power up and where does the lead that's between the power and ground connector to? Is that also a ground? Second when bridging a Titan TXi 6406 to 2 channel at 4 ohms, does anyone know how to wire the speaker wires into the amp? Thanks

mikeski 06-12-2006 10:07 PM

Control does not need to be used. <BR> <BR>Center wire is the turn on, hook it to the deck's amp trigger wire or power antenna wire. <BR> <BR>The bridging wiring is usually the two outside wires on the speaker block but it should be screened on the amp or in the manual.

dudeman 06-13-2006 2:48 AM

Thanks Mikeski. What gauge would you recommend for the center wire? Also last question. Should the speaker wires be bridged between the outside blocks of 1 and 2 &amp; 3 and 4 or 1 and 3 &amp; 2 and 4?

mikeski 06-16-2006 4:45 PM

The center wire is just a relay trigger, 22ga or bigger is fine.


All times are GMT -7. The time now is 9:54 AM.